06 350Z front brakes

[MrMcgarrett]

Got a set of huge 350Z front brakes.
Rotors are 320mmx28mm.
Rotors are in good condition, no grooves and such.
Pads have lots of life left.
The mounting holes on the spindles need to be opened up to 14mm.
SS braided lines included.
You'll need at least a 17in wheel.

Setup consist of:
Calipers
Rotors
Lines
Modded S13 Spindles(no hubs)

$220
Shipping will be pricey due to the weight.

http://i92.photobucket.com/albums/l5/MrMcgarrett/350zbrakes05.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/350zbrakes04.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/350zbrakes03.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/350zbrakes02.jpg

[SDS13COUPE]

Whats modded on the spindle?

[Marcus]

the bolt holes have to be drilled to a larger size. i forgot how big. i had to do this for mine

[rb25crazy]

if u mod the spindle the 5 lug hub works too?

[Def]

Damn, can you fools not read?!?!

You drill the caliper mounting holes on the spindle up to 14 mm(up from the S13/S14 stock 14 mm).

[MrMcgarrett]

See below post lol

[MrMcgarrett]

Whats modded on the spindle?
The mounting holes were drilled to 9/16in(14.3mm)
Little bigger then they need to be but I couldn't find a 14mm drill bit.

if u mod the spindle the 5 lug hub works too?
The hubs were made for the S13 spindle.

[nochain]

FREE BUMP haha

I put a set on my z31 worked hella good wish I still had them I would buy but I need to find a 5 lug setup first that is not retarded expensive

[MrMcgarrett]

Last time to the top.