zenki to kouki

[240rider95sx]

how hard is the conversioin from a zenki to a kouki? like ive found some stuff on the s15 conversion and they had to like weld stuff and cut metal out and shit. not to sure im down for all that.

[mrizsuki]

search the forums..... tons of stuff out there already.
anyways, basically you need the headlights, hood, fenders, bumper and bumper retainer. then the optional piece, the headlight bracket, which you can drill a hole to make it line up or you can buy the set off nissan and drill your old ones out and put the new one in by welding or 2 10mm bolts w/ nuts. good luck with swap.

http://www.nicoclub.com/articles.php?id=275692 better info on everything dealing with swaps

[enkei2k]

just buy a kouki to save you the trouble.

[upsdude]

welcome to zilvia, brace yourself for some major flamage.

[ManoNegra]

Not hard at all. everything bolts on
just finding the parts is difficult since they sell for a premium used or new and hardly ever come up for sale.
only difficult (not really) is the headlight brackets like mentioned but the dealer has those and they sell for less than $100

the headlights wiring is a little different aswell (it's covered in a thread here)
you may want to look that up if you're going to be putting HIDs in the headlamps.

[ThatGuy]

Grab some sockets.

Turn every bolt on the front end counter-clockwise until they fall out.

Remove all Zenki parts.

Line up Kouki parts.

Turn bolts in a clockwise direction until they no longer move.

Pat yourself on the back.


For any further details, SEARCH.

:lockd: