stunnaben
12-14-2009, 11:14 AM
Name: George
Location: Raleigh NC
Contact: PM or 910-232-2558
Price: $1000
I decided to keep the other two for a twin turbo setup on my track 350z.
I am selling a brand new Turbo I received from IHI Power Enterprise. This turbo has 0 miles of use. The turbo was going to be used for my S14 but I have sold the car before I ever even got the turbo.
This turbo is a modified IHI turbo from Power enterprise. It is one of their "Response Series" turbos. The PE1420 turbo utilizes a slant-flow blade design which allows the turbo to spool at an incredibly low RPM and still give out good horsepower gains all the way up to redline. Since the angle of the flanges are similar to the S14 and S15 turbos, Power Enterprise has attached a few extras to this kit to make the turbo compatible.
Installation is quite simple with this kit, making this a plug and play turbo. This turbo hits hard from 2500 rpm with good power all the way to 7,000 giving it a very broad, useable power band
Compressor
Inducer
1.79"/45.5mm
Exducer
2.37"/60mm
Turbine
Exducer
1.73"/44
Inducer
1.89"/48mm
This turbo is going new from $1399.00 - $1700 without the intake upgrade I have.
http://i799.photobucket.com/albums/yy275/abl2fly/DSC_2246.jpg
http://i799.photobucket.com/albums/yy275/abl2fly/DSC_2247.jpg
http://i799.photobucket.com/albums/yy275/abl2fly/DSC_2249.jpg
Location: Raleigh NC
Contact: PM or 910-232-2558
Price: $1000
I decided to keep the other two for a twin turbo setup on my track 350z.
I am selling a brand new Turbo I received from IHI Power Enterprise. This turbo has 0 miles of use. The turbo was going to be used for my S14 but I have sold the car before I ever even got the turbo.
This turbo is a modified IHI turbo from Power enterprise. It is one of their "Response Series" turbos. The PE1420 turbo utilizes a slant-flow blade design which allows the turbo to spool at an incredibly low RPM and still give out good horsepower gains all the way up to redline. Since the angle of the flanges are similar to the S14 and S15 turbos, Power Enterprise has attached a few extras to this kit to make the turbo compatible.
Installation is quite simple with this kit, making this a plug and play turbo. This turbo hits hard from 2500 rpm with good power all the way to 7,000 giving it a very broad, useable power band
Compressor
Inducer
1.79"/45.5mm
Exducer
2.37"/60mm
Turbine
Exducer
1.73"/44
Inducer
1.89"/48mm
This turbo is going new from $1399.00 - $1700 without the intake upgrade I have.
http://i799.photobucket.com/albums/yy275/abl2fly/DSC_2246.jpg
http://i799.photobucket.com/albums/yy275/abl2fly/DSC_2247.jpg
http://i799.photobucket.com/albums/yy275/abl2fly/DSC_2249.jpg