Car Audio Help - 1996 240sx SE

[popey]

I'm installing my components up front and I wanted to put the new tweeters in the stock location. I need help finding out where the stock SE tweeter wires go to, so it can go to my crossover. Anybody know?

Thanks,
Matt

[scandalcat1]

they run to the rear amps under the deck. Open the amps and a wiring diagram by clarion will be there to help figure it out.

[gfisch]

You can just run them down the back of the dash in the corners of the a-pillars. A coat hanger works well for snaking the wires. then just run them to wherever you have your crossovers. You can probably run the wires under the carpet by the door frame if you have to get to the trunk or under the seat.

[timmybgood]

ahhhhhh there's amps under the rear deck! that would explain why when i put in my pioneer headunit, it won't play sound, and thats also what those 2 little blue wires were for on the wire harness.

so my question is, how should i hook up those blue wires so that my speakers will play? anybody? anybody? beuler?

[gfisch]

Oh, didnt realize that was the problem.
You can bypass those amps. You definately should if you have aftermarket head unit.
You can unplug the amps and splice the wires.

I pulled this off another post a while ago.
You can do a search.



1 Blue left front speaker neg. input

2 Black right front speaker pos. input

3 Blue/yellow left front speaker neg. output

4 Brown/white right front speaker neg. output

5 Brown right front speaker pos. output

6 Pink left front speaker pos. input

7 White right front speaker neg. input

8 Blue/white left front speaker pos. output

9 Blue acc.

10 Green/red on/off

11 Purple left rear speaker neg. input

12 Pink right rear speaker neg. input

13 Green left rear speaker neg. output

14 Pink right rear speaker neg. output

15 Blue right rear speaker pos. output

16 Green left rear speaker pos. input

17 Blue right rear speaker pos. input

18 Red left rear speaker pos. output

19 Blue acc

20 Green/red on/off



Splices:



1 to 3

2 to 5

4 to 7

6 to 8

11 to 13

12 to 14

15 to 17

16 to 18


I did it on my last s14 and it worked. I'm not positive if the above is correct as I did it before anyone posted on it and did it a multimeter and following wires.

[scandalcat1]

This is the actual wiring diagram with a nice representation. I don't know about the splicing bit.
Here you go...
Nissan Wiring Guide (http://www.installdr.com/Harnesses/Nissan-Wiring.pdf)

I could not link from my site, so I linked from Ron's site, skylinegtr. The diagram is the same as a 240SX