Team SE-R
12-04-2009, 09:37 PM
Hi, everyone....
The following is to address a matter concerning a friend of mine in another forum in Puerto Rico. He has an S13 to which he recently installed a set of 16x8" wheels, 0 offset, as part of some upgrades for a drift event that will take place soon in the Island. The next step he took was upgrading the front brakes with a set of Z32 calipers, however, upon finishing the job he saw that the calipers did not clear the wheel spokes. He temporarily remedied this by altering the camber angle in favor of not putting a set of 1/2" wheel spacers that would make the wheels stick out of the fender wells in a ridiculous way. What he needs to know is what does he need to do to solve that caliper clearance issue. Thanks in advance! Be well....
The following is to address a matter concerning a friend of mine in another forum in Puerto Rico. He has an S13 to which he recently installed a set of 16x8" wheels, 0 offset, as part of some upgrades for a drift event that will take place soon in the Island. The next step he took was upgrading the front brakes with a set of Z32 calipers, however, upon finishing the job he saw that the calipers did not clear the wheel spokes. He temporarily remedied this by altering the camber angle in favor of not putting a set of 1/2" wheel spacers that would make the wheels stick out of the fender wells in a ridiculous way. What he needs to know is what does he need to do to solve that caliper clearance issue. Thanks in advance! Be well....