injector resistor pack(s)

[240sxrb25]

i am using low impedance inj.s on my rb25. i bought a set of 2, 4 cylinder honda packs from a friend who used them successfully on his rb. he wires both of the power wires together and only used 6 of the 8 injector wires.

i am using an ohm meter to test the pack(s) by probing the power and the injector wire(ground/signal). it isnt reading any resistance.

its not in the car, does it need to have power and be bolted to the frame first for any resistance to show?

thanks

[robertftw]

you can get a resistor box from a 6 cylinder honda, acura or toyota and only need to run one box fyi.

[240sxrb25]

you cant run one 4 cylinder box for a 6 cylinder engine. thats why i have 2 of em hooked up

any help on testing a resistor box would be appreciated

[robertftw]

No not the 4 cylinder box the 6 cylinder one from a v6 motor, but any ways you need to put power to the box and check for continuity to each output if it is bad there will be nothing cuz the resistor popped. hope that heleps and good luck.

[smelly240]

use accord v6 one...

[codyace]

i just goto radioshack and by em