PDA

View Full Version : FL ka-t part out, turbo, injectors and more...


T_A_T_O
11-17-2009, 12:28 PM
Juan R. [email protected] 321-947-3309 Orlando Florida

Will trade for lsx parts, GM dana 60 or 14 bolt parts. (Axles)
Prices are obo

Motor has been built for about 2 years and 2k miles. Broken spark plug in #2 cylinder caused cylinder scoring and grooving. #2 piston has minor damage to edges as well as piston wall above the rings, no damage to rings. Compression tested at 150 psi. 150 psi as well for the other 3 cylinders.

1. Block. .20 overbore. Grooving and scoring on #2 cylinder. Recommend machine work. includes lower timing cover with rebuilt oil pump. $60

2. Head. Slight damage to combustion chamber area on #2. Also the compression tester fitting is seized on the spark plug hole. BC dual valve springs and retainers. Includes cams & caps, idler sprocket & cam sprockets, upper timing cover. $240

3. Pistons. Arias 8:8.1 .20 over. Slight damage to #2 piston. $200. New .20 over piston is $150 from arias.

4. AMS Sportsman rods. Perfect condition. $280

5. ARP 10mm studs with hardware. $60

6. Timing kit. Both chains, 2 guides, 2 tensioners and bolts. $200

7. Flywheel. $20 recommend resurfacing

8. ACT street disc & PP. good condition $160

9. Garret GT3076r, .63 ar, t2 flanged, 3" inlet. iwg rod cut and tack welded to housing. bought brande new from ATP turbo. under 1k miles. $800 $1k with exhaust mani modified for ewg, oil line, coolant lines, downpipe elbow and downpipe

10. Enthalpy s13 ECU tuned for s14 t28, 550cc, z32 maf. $300

11. tial 38mm wastegate with 17psi springs & dumptube. $140

12. Deatchwerks 550cc injectors. $280 $320 with fuel rail and nismo adjustable fpr.

13. hot and cold side charge pipes for s13. Comes with turbo intake pipe and DSM 1g BOV recirculated. Stock 2" SR hot pipe from turbo. Rest is 3" Pipes are tig welded. $100

14. Intercooler. 4" thick, 12"H x 30" W. Slight trimming needed to fit s13, comes with simple homemade brackets. $160

15. z32 maf with adapter and filter, no harness or connector. $80

16. Greddy Profec B specc II. barely used $240

17. 3" exhaust with testpipe. $120

18. Distributor with taylor 8 mm wires. $40

19. intake manifold. $40

20. BNIB felpro headgasket and mr gasket copper exhaust gasket. $50

21. 4 NGK BKR7e plugs. brand new. $10

22. ARP mainstuds with hardware. $60

23. Crank with girdle. $40

I will have pics hopefully this week, thanks for looking

http://i759.photobucket.com/albums/xx235/T_A_T_O/photo.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-1.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-2.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-3.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-4.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-5.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-6.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-7.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-8.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-9.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-10.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-11.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-12.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-13.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-14.jpg
http://i759.photobucket.com/albums/xx235/T_A_T_O/photo-15.jpg

sidedrifts13
11-17-2009, 02:26 PM
what brand injectore and how much?

Steveohoes
11-23-2009, 11:12 PM
how much for head studs shipped to 01151

s142jzkillav10
11-23-2009, 11:46 PM
Are the plugs 4644's if so I'll take them.