PDA

View Full Version : CA S13 JIC Coilovers

Slammed180
11-15-2009, 10:47 PM
*Coils are located in Calgary, Alberta, Canada*

These have been identified as FLT1 or A1, twintube damper by JIC USA. New version dampers can be purchased for these from JIC USA if needed. I'm unsure of how many miles are on them. They are gas filled. Fronts have been modified for more neg camber. These were on my car from Japan. $600 CDN
http://i184.photobucket.com/albums/x289/Slammed180/IMG_4643.jpg
http://i184.photobucket.com/albums/x289/Slammed180/IMG_4642.jpg



Shipping is not a problem, but buyer assumes all charges. For Paypal, I'll split the cost, so please add 1.5%. I very rarely sell any items, so I don't have any feedback. My ebay is 100% (same user name, if you'd like to check), but only as a buyer.

I also have all the stock arms, brakes, swaybars, and hubs off my 1990 180sx.
if anyone is interested in those, just make me an offer.
Slammed180
11-16-2009, 04:57 PM
Bump #1
Open to any reasonable offers.
Red Dragon3
11-16-2009, 06:11 PM
So are these coilovers blown or leaking?
Slammed180
11-16-2009, 06:28 PM
So are these coilovers blown or leaking?

I'm unaware of either problems.
When my car was actually running, these were stiff and made no clunking noises. I just wanted to make sure that people were aware that replacement dampers could be ordered if ever needed in the future.

Car hasn't moved in nearly 2 years. Getting the car to run is top priority, not suspension. Hence why these are for sale.
Lumos
11-16-2009, 06:42 PM
If your interested in splitting them up I'd be interested in the fronts...
Slammed180
11-16-2009, 08:13 PM
If your interested in splitting them up I'd be interested in the fronts...

No thanks. Not interested in splitting up the set.
Jonnyblaze
11-17-2009, 05:01 PM
Can they be "unmodified" so they don't put unnecessary negative camber on the front?
Slammed180
11-17-2009, 05:13 PM
Can they be "unmodified" so they don't put unnecessary negative camber on the front?

Yes, just use the factory hole where it meets the knuckle.
Slammed180
11-19-2009, 08:05 AM
Bump #2
Willing to take $650 USD shipped for these.

And because I've had lots of questions......
http://i184.photobucket.com/albums/x289/Slammed180/IMG_4655-1.jpg
The top left hole is the added hole for more neg camber.
If you don't want more neg camber, use the factory hole on the right.