sLiDewAys
11-11-2009, 02:11 PM
*1991 Ininiti M30 2Door Coupe
-White Cream Pearl [must see in person]
-140,xxx Original Miles
-Automatic
-Working AC & Heater
-Perfect commuter, Very Reliable!
ASKING $3,500.00
$3,000.00 w/o The Rims
*Footwork:
-300zx Turbo front Calipers
-Crossed Drilled Rotors
-SS Brake Lines
-KTS SC 16 Way Adjustable Coil overs [s13] 10/8 & 8/6 kg Springs
-Tein Hard Tie Rod Set (Inner & Outer) [s13]
-Tein Tension rods [s13]
-C-pillar Bar [s13]
-Front & Rear strut bar [s13]
-Cusco Tension rod brace [s13]
-5 lug conversion Front & Rear [z31 rear & Ichiba s13 Front]
*Wheels
- Mustang Cobra R w/ NEW* Federal 595s Tires
17x9+24 w/ 215/45/17
17x10.5+27 w/ 245/40/17
-2x 300zx Turbo wheels w/ bald tires
Pictures Below!!!
http://farm3.static.flickr.com/2508/4090707058_d60febcf13_o.jpg
http://farm3.static.flickr.com/2531/4089942105_0119062691_o.jpg
http://farm3.static.flickr.com/2803/4090705538_031aa82357_o.jpg
http://farm3.static.flickr.com/2610/4089943163_3425dbc811_o.jpg
THE BAD!!!!
http://farm3.static.flickr.com/2586/4089942923_bacabd13f4_o.jpg
*EXTRAS:
I have a near complete 5 speed conversion for this car!
-z31 Driveshaft
-z31 Transmission
-s13 clutch pedal assembly
-NEW OEM s13 clutch master cylinder
-NEW OEM z31 Clutch slave cylinder
-NEW Stainless Clutch line [runs from master to slave cylinder]
-vg30et MAFS**
-vg30et turbo manifold, oil feed, oil return, banjo bolt
-vg30et exhaust manifold w/ 02 dump
-vg30et heads [good condition]
-vg30et spare parts engine COMPLETE but blown!
http://farm3.static.flickr.com/2567/4091114866_fd01496c73_o.jpg
http://farm3.static.flickr.com/2670/4091114446_1bba7b1f72_o.jpg
MODIFICATIONS NEEDED TO PERFORM 5 SPEED:
-chop the yolk off OEM m30 drifeshaft and weld onto z31 driveshaft
-modify neutral positioning sensor
-Modify OEM s13 Clutch pedal to fit in m30 [very easy if you have a torch and patience]
-MOdify OEM m30 transmission crossmember to work with z31 trans.
and voila, you have 5 speed m30. SUPER RARE! I think there are only 10-15 in all of USA!
-White Cream Pearl [must see in person]
-140,xxx Original Miles
-Automatic
-Working AC & Heater
-Perfect commuter, Very Reliable!
ASKING $3,500.00
$3,000.00 w/o The Rims
*Footwork:
-300zx Turbo front Calipers
-Crossed Drilled Rotors
-SS Brake Lines
-KTS SC 16 Way Adjustable Coil overs [s13] 10/8 & 8/6 kg Springs
-Tein Hard Tie Rod Set (Inner & Outer) [s13]
-Tein Tension rods [s13]
-C-pillar Bar [s13]
-Front & Rear strut bar [s13]
-Cusco Tension rod brace [s13]
-5 lug conversion Front & Rear [z31 rear & Ichiba s13 Front]
*Wheels
- Mustang Cobra R w/ NEW* Federal 595s Tires
17x9+24 w/ 215/45/17
17x10.5+27 w/ 245/40/17
-2x 300zx Turbo wheels w/ bald tires
Pictures Below!!!
http://farm3.static.flickr.com/2508/4090707058_d60febcf13_o.jpg
http://farm3.static.flickr.com/2531/4089942105_0119062691_o.jpg
http://farm3.static.flickr.com/2803/4090705538_031aa82357_o.jpg
http://farm3.static.flickr.com/2610/4089943163_3425dbc811_o.jpg
THE BAD!!!!
http://farm3.static.flickr.com/2586/4089942923_bacabd13f4_o.jpg
*EXTRAS:
I have a near complete 5 speed conversion for this car!
-z31 Driveshaft
-z31 Transmission
-s13 clutch pedal assembly
-NEW OEM s13 clutch master cylinder
-NEW OEM z31 Clutch slave cylinder
-NEW Stainless Clutch line [runs from master to slave cylinder]
-vg30et MAFS**
-vg30et turbo manifold, oil feed, oil return, banjo bolt
-vg30et exhaust manifold w/ 02 dump
-vg30et heads [good condition]
-vg30et spare parts engine COMPLETE but blown!
http://farm3.static.flickr.com/2567/4091114866_fd01496c73_o.jpg
http://farm3.static.flickr.com/2670/4091114446_1bba7b1f72_o.jpg
MODIFICATIONS NEEDED TO PERFORM 5 SPEED:
-chop the yolk off OEM m30 drifeshaft and weld onto z31 driveshaft
-modify neutral positioning sensor
-Modify OEM s13 Clutch pedal to fit in m30 [very easy if you have a torch and patience]
-MOdify OEM m30 transmission crossmember to work with z31 trans.
and voila, you have 5 speed m30. SUPER RARE! I think there are only 10-15 in all of USA!