wtb front z32 4 lug rotors for a s14

[super240s14]

like the title says, i have a pair of 26mm front rotors just 5 lug though thats why i need the 4 lug or if someone can help me find out how to get mine drilled to 4 lug?? or what site i could go to and get them, dont want to switch to 4 lug just yet.... please help i need them asap

[Dousan_PG]

Circuit Sports Z32 Front Brake Rotors (26 & 30mm) (http://www.phase2motortrend.com/p2mz32frbrro.html)

[DreamN]

I can have your rotors drilled to 4 lug for $30 a pair.

[mazersx]

Get them at 88 rotors brand new $100 drilled and slotted

[jesse5150]

Just get a 12mm or 1/2" drill bit and use a drill press. Or hand drill if you have to. Then clamp your old 4 lug rotor to the new one and drill. I just drilled my Q45 rotors to 4 lug with one mild steel bit. Just keep the bit cool by keeping oil on the bit. You should only have to drill 6 holes because one should line up on each rotor.

[super240s14]

just get a 12mm or 1/2" drill bit and use a drill press. Or hand drill if you have to. Then clamp your old 4 lug rotor to the new one and drill. I just drilled my q45 rotors to 4 lug with one mild steel bit. Just keep the bit cool by keeping oil on the bit. You should only have to drill 6 holes because one should line up on each rotor.

thanks so much i did this about an hour ago, what i did was put a 1/2 bolt into that 1 hole that lines up then got a clap to hold as well then drilled with a hand drill, worked perfectly went to check it out before i put back on my old rotor... Thanks alot man, most people think im stupid to ask ... Thanks