KA24DE race engine NOT STOCK forsale

[mestzorx7]

KA24DE Yes, it’s a built motor. $900obo need it gone. See video link : http://www.youtube.com/watch?v=0rVaMWWT3wc (http://www.youtube.com/watch?v=0rVaMWWT3wc)
Eagle Rods
Custom Arias pistons 11to1 compression designed for Turbo Charged application
New Clevite bearings
ARP main studs
ARP 11mm head studs
Brian Crower Valve springs
Cometic Head gasket
New Nissan front end(oil pump, chain, guides, etc..)
Head work: valve job, new exhaust guides, pressure tested, decked, ported exhaust side.
Turbo oil drain -10AN bung welded on oil pan
Turbo water line sources already tapped and ready for AN fittings or plugs if not needed
Turbo oil line source drilled and tapped ready for -3AN lines
New water pump
Balanced assembly

http://i939.photobucket.com/albums/ad231/firesale562/Nissan%20stuff/IMG_1095.jpg


Call 562-243-9151 ask for Fire Sale I would prefer you call and not post since I don't freq check the forums. Thank you.

[iMAGE976]

how many miles on the motor? and what were you running with it? what kinda numbers did you get with what kind of tune? lmk cuz im interested.....thank you

[foreverdark]

It's mine!!! I want it!!!

[killab18]

compression at 11:1 for turbo?? thats not ideal. lol.

[jdmchuckiwill]

yea 11:1 compression is for a na build not ideal for turbocharged

[zenki.life]

kaboom says the turbo engine.

[mestzorx7]

If you have to ask, this engine is out of your capability. Selling dirt cheap b/c I want it gone. It was running when I pulled it out but I sold the car so now I'm left with an engine. Crank for oil pressure before you run it and your good to go. If you plan or running it turbo charged you will need to use C16/Q16 or Methanol Fuel. If you want to run it N/A go for it! If you look at the spec's this engine will take whatever you can throw at it... Make sure you have a good tuner =)

[Flybert]

I rode with Henry in his car with this motor and it is ridiculously awesome. It was super responsive. Henry was upshifting to 3rd in the 2nd gear sections of horse thief mile because it has so much grunt down low and it spools the turbo up quick. I never knew the compression was so high which makes complete sense now. I will vouch for how awesome this setup is with a turbo.

[ReLevent1]

sucha a badass engine. if i was still in the ka game i would got this so fast.

[theconnect]

try 8's or 9's but not 11 for turbo compression... Maybe there is something i do not know that you do if so please let me know...

[JKim0901]

yea its called c16/ and meth injection.

[donkayroo]

I laugh every time people say...10.5...11...too high compression for turbo. Newbs...8.5 is great if you wanna brag that you're boosting 25-30psi and have to rev the crap outta the motor before getting decent boost. Additionally, low comp turbo motors have crap bottom end power.

Of course, if your driving style likes revs, go for low comp. KA's are known for massive bottom end torque and a high comp turbo setup is the best for it especially since so many people complain about the KA's inability to hold 7k rpms reliably.

Want revs...go SR, it's stroked for it.

Basic rules for high comp turbo setups...no need for massive boost (less wear on turbos due to lower spool rpm required to maintain boost)...run plenty of GOOD fuel (not so much you wash out the rings)...make sure you have a competent tuner.

You can still bust a low comp motor in a day. Why? Because the tuner didn't retard enough timing, ran it a bit too lean to impress you with super crazy high HP/torque numbers, you decided to crank up the boost after the tune or a combo of both.

Those who understand the logic for high comp turbo motors get it. Those who don't have to learn to think outta the box.

I'm boosting 7psi on a stock bottom end and low end response is awesome.

mestzorx7 - Thx. Responded to pm.

[fuk240sx]

Its all about the tune! this motor should be some major fun!
GLWS

[limited240]

thats a good ass deal..

[ashtonroche]

i laugh every time someone says that as well about high compression being bad for boost. Yes not the IDEAL but for example.

Guy on another forum with a bone stock SR20VE 11:1 compression motor on a big turbo made 550+whp on only 18psi of boost. The motor was dead stock down to headgasket and at that power level the head finally started to lift to where headstuds and metal headgasket were needed. He is using 91 octane pump gas and water/meth injection.

ill post the sheets up here in a bit.

http://i38.photobucket.com/albums/e116/jpsr20det/dynos/primeradynosr16camsto8000rpm18lbs.jpg
92 plus alky
same setup on the ve

he is using a hybrid borg warner 62mm compressor w 1.15 A/R turbine housing. Again bone stock ve with SR16ve cams. Tell me thats not response.

This motor for sale will make crazy power everywhere with a properly sized turbo and a good tune. I would definetly do water/meth and all your problems solved right there. Still run pump gas. End of story.

[Chue240sx]

where are you located?

[let5l1de]

Great price for all these mods! My current s14 KA is nearly the same. However, I chose Wiseco pistons and coated bearings.

I have some questions:

What cams are under that s13 KA valve cover?

You state the bearings are fresh, what condition were the previous bearings in?

How many re-ring and or bearing replacements have been performed and when was the last ring replacement.

If well maintained, cylinder bore info or at least current piston diameter for future rebuilds.


~mario

[ryster]

Wow! A good price on the engine! Seen this car in action.

Guys commenting on the compression gotta do more research.

Good luck with the sale.

[deolio]

where are you located?

[zenki1995]

$900 that a deal!

[wang chung]

wow good deal on the motor im going boost as soon as i get money and i sit at 12:1 as long as you run race ga and water meth the motor will handel what ever of course with a good tune

[jdmchuckiwill]

wow i was wrong man sorry..
thats amazing.
bump

[fckillerbee]

henry wtf!!!!! This motor was fucking epic! look up federal s13. that was this motor. dude...you need to call me!

[limited240]

is this still for sale.