PDA

View Full Version : s14 zenki HID/highbeam only problem

Skyn
10-10-2009, 06:43 PM
put in my hids today the right side (passengerside)
only comes on when the high beams are on and the drivers side is on normally which wires have to be re pinned
on the passenger side to be on normally??????




Thz in advance
projectRDM
10-10-2009, 08:45 PM
You installed them, but you're asking us what you did wrong?

How do we know what you did?
GSXRJJordan
10-11-2009, 03:08 AM
What kind of kit did you use? I'm guessing you used the H4 single-beam kit, and plugged the male spade connector into the high-beam lead, not the low-beam lead.
Skyn
10-11-2009, 02:48 PM
yeah i did it was only on that side i had to put red on red and black on black becasue the red was on green figured it would be the same on both side that needed re pinning but no its fixed now
nismo 240sx
10-12-2009, 11:34 AM
if you look straight at them theres three inputs left top and right..i pluged mine on left and top and its works fine...i have no highs but i have lows..
Skyn
10-12-2009, 11:49 AM
yeah mines just on left and rioght on the passengerside and i still have highs too

but the driver side is top and ground