Widest wheels on a stock bodied s14? Picture

[whippet]

http://www.240edge.com/basics/96sefr.jpg
I'm looking to buy some new/used wheels. What's the widest, properly offset, rims (front & rear) that will fit a stock but lowered s14? I plan on rolling my fenders for maximum clearance.

I have 300zx calipers up front. Prefer big lip look or super concave look.

Thanks a lot!

[s13silvia123]

click on me dumbass (http://lmgtfy.com/?q=where+can+i+find+wheel+fitment+on+a+240sx+on+Zi lvia.net)

[palmdale_mob]

click on me dumbass (http://lmgtfy.com/?q=where+can+i+find+wheel+fitment+on+a+240sx+on+Zi lvia.net)

haha that always makes me laugh

[Slammed Assassin]

click on me dumbass (http://lmgtfy.com/?q=where+can+i+find+wheel+fitment+on+a+240sx+on+Zi lvia.net)


ahahah!! funny stuff

[gotta240]

So far, best fitment i've fount is a 18x9.5 plus 17 offset with a few degrees camber. Just a roll.

[whippet]

click on me dumbass (http://lmgtfy.com/?q=where+can+i+find+wheel+fitment+on+a+240sx+on+Zi lvia.net)

Only a dumbass would sift through hundreds of vaguely related threads for a quick answer. I've got a life to live.

[JEDIs13]

Only a dumbass would sift through hundreds of vaguely related threads for a quick answer. I've got a life to live.

im sorry but nobody is gonna help you if you dont try and help yourself.
find the search button. learn to use it and love it

[s13silvia123]

Only a dumbass would sift through hundreds of vaguely related threads for a quick answer. I've got a life to live.

wrong only a dumbass would come back to this thread and ask even dumber questions LMAO

[Masa]

let me spoon feed you bro.

click on me :mrmeph: (http://zilvia.net/f/chat/129865-wheel-fitment-whore-thread-stretch-flush.html)

[whippet]

I searched. No luck. Thanks for the tip.

[whippet]

Again, I've seen that thread. Shit's old. It's mostly pictures of s13s w/ occasional tire size - irrelevant to me. If it's there - spoon feed me to the page - not the 100+ pages of bs.

[MELLO*SOS]

Nobody wants to help anymore, since everythings been discussed and beaten to death... All anyone wants to do is jump in and tell you to search!!! Of course, you should spend hours and hours searching, but it's funny how many of your results are threads of other people telling to search hahaha

I just got done messing around in the garage and have a few minutes to spare... Not sure what you're looking for in terms of functionality, look, etc.. Only way you're going to find what you want is to look at tons of pics and specs on other cars... Like that wheel fitment thread they all pointing you at... Anyway here's my setup for reference

http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs134.snc1/5735_1200315642302_1060861728_30630890_5017812_n.j pg

front 18x9 -6 with 215/35 rear 18x10 -7 with 225/35 on my stock body 14.. Dumped and camber, roll and pull on both ends. I think it looks great. I'd suggest 9/10 stagger in as low of offset as you can find.. If it doesn't fit how you want throw some spacers on..

GL.

oh and, SEARCH NOOB hahaha

[SochBAT]

If I still had my sigs, I'd post here.

But just get FNs and call it a day.

NO ONE has FNs.

[JRas]

are you looking to fit massive tire? or just a massive wheel with a stretch?

didn't really specify

either way we have two threads for each of them both are stickied

good luck

[jspaeth]

I am running 17x9 +17 in the rear (Work emotions) with a roll and minor pull, and have substantial room on the inside between wheel and coilover.

I feel like maybe I could fit 10s with like a 275 or so, with the right offset.

[fliprayzin240sx]

20x13 +30 offset is the widest and largest you can go under a stock body..

[HYPNOTIK]

20x13 +30 offset is the widest and largest you can go under a stock body..

Does that have a tire on it? haha.

[SexPanda]

http://417racing.com/board/garage.php?mode=view_image&image_id=54
lol I'd say it looks stock... those are 14 inch slicks IIRC. lol I'll have to ask blake when I go down to springfield to see some friends.

[Bigsyke]

OP If I had it my way, Id make my car look exactly like the 96 in your picture. Freshen up the engine bay and make it look like it just rolled out of the showroom.

[s14canyoncity]

click on me dumbass (http://lmgtfy.com/?q=where+can+i+find+wheel+fitment+on+a+240sx+on+Zi lvia.net)

hahahahha to funny, yup that thread helped out alot great info.

just like MELLO*SOS (http://zilvia.net/f/members/mello-sos.html) said if it doesnt look right throw on some spacers
here mine with spacers 18x8 front 18x9 rear with +35 (yes that some weak ass offset) just couldnt afford ballin ass rims with low offset.

http://farm4.static.flickr.com/3427/3997200604_b7ac385460.jpg
http://farm4.static.flickr.com/3505/3997539703_fe910f40b2.jpg

[CrimsonRockett]

We're not here to spoon feed you.

:lockd: