PDA

View Full Version : sr20 sandwich plate HELP! allen bolt sizing


mrchomponthis
10-08-2009, 02:00 PM
I just bought a sandwich plate from flooder, he didn't give me the allen bolts. I need to know the sizing of the four allen boths that screw into the block thanks. here is a picture. Also the gasket did not come with it, I was thinking maybe the stock gasket would work but i am not 100% sure.
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/P9150012.jpg

s14unimog
10-08-2009, 02:14 PM
Are the ones you have there too long? I'm sure you could run up to Home Depot or Lowes and figure out what the thread pattern is; I'm guessing M8 - 1.25. For future reference, its called a Hexagonal Socket Head Cap Screw...

mrchomponthis
10-09-2009, 01:22 AM
that is a picture I found online.

s13silvia123
10-09-2009, 09:56 AM
hardware store is your best friend. take it there and look for the bolts. but if you cant find it there. this is the place to call. Fastenal, they carry evey kind of bolt and size. you'll just have to ask them for what youre looking for.

Dousan_PG
10-09-2009, 10:00 AM
why not see if the stock ones fit this_ when remove the stock on u can find out.
or if they ar too long/short, take one with you to hardware store so youll at least have size and threadpitch

and for gasket, good luck with that. usually its just 2 small o rings iirc

mrchomponthis
10-09-2009, 10:57 AM
oem bolts don't work.

mrchomponthis
10-09-2009, 10:59 AM
what did you people use for a gasket?!?!

tunersedge
10-09-2009, 11:02 AM
if thats the circuit sports oil block adapter, you can use the oem o rings things that are on the stock adapter.

edit: i used a little rtv also to ensure a complete seal.

NewS13Guy
10-09-2009, 02:38 PM
oem is 6mm. thats the size i used to get my oil filter housing off if im not mistaken

projectRDM
10-09-2009, 02:53 PM
oem bolts don't work.

But they are the same thread pitch. You couldn't just go match up a cap head bolt to the OE one? That's too difficult?

WISH ONE
10-09-2009, 02:58 PM
Ill have the bolts here at work, I currently only have the standard thread sizing, I should have a new stock of the Metric on monday.... Ill just text you.

Dousan_PG
10-09-2009, 06:13 PM
oem woul be same size and thread pitch
just differnt length

this shit isnt exactly rocket science...

mrchomponthis
10-09-2009, 09:17 PM
i hate rocket science

rebornS14
10-09-2009, 09:20 PM
my stance oil block had gaskets built in.