PDA

View Full Version : KA, Knock sensor problem?


blackrms13
09-30-2009, 10:57 AM
I have a stock 95 OBD-I KA in my s13 with supposedly about 80k miles

the engine at random times will have
-rough idle + "thomping" noise/vibration
-holding idle at about 1500 rpm + misfires
-possibly running rich(smells really bad)
-code 34 stored in the ECU, but no CEL

sometimes it will run VERY smooth like nothing is wrong what so ever, sometimes it will run VERY shitty...

i dont really feel any power-loss at all...so yeah

someone suggested its the Knock Sensor sub-harness thats not sending good signal to the ECU, and thus pulling the timing and what not causing this problem

any ideas?

blackrms13
10-07-2009, 03:43 PM
i think i solved the problem by replacing the KS....case closed

grnappletree14
10-07-2009, 10:02 PM
where did u get ur knock sensor at... and how much

blackrms13
10-08-2009, 01:13 AM
from a friend...he hooked me up

Nismo_tuner

i think he has like 2 more?

but ebay has them...but i duno how legit those are