thetopcow
09-29-2009, 01:34 PM
Well it is a grab bag of parts. I will just say make offers on what you want and get it out of here. I will do a photo and then parts list for that photo under it. Consider all things used unless otherwise noted.
Buyer pays for shipping and paypal fees, so include that in your offer.
http://i132.photobucket.com/albums/q4/thetopcow/DSCF2448.jpg
S14 Fogs(right one in pic has a rock chip in it)
S14 MAF Sensor(Intake tube and Airbox not included)
S13 SR Intercooler piping
S14 Tension Rod
S14 Front Lower Control Arms
Z32 Rear Uprights
T25 Turbo for parts
S13 Interior behind side mirror component speaker mounts(have Kick panel ones too
S13 Front and Rear Struts and Springs
S13 KA Auto Trans Stuff(torque converter, Flexplate)
R32 RB20det turbo(chipped up inducer fins, still works and produces boost fine, comes with wastegate solenoid and oil return)
http://i132.photobucket.com/albums/q4/thetopcow/DSCF2443.jpg
S13 Inner and Outer Tie Rods
KA24E Computer
S13 Factory Fuel Pump
Z32 Oil Cooler
Ebay Nismo Filter
S13 Ball joints(two fronts, and one rear)
SR(and other engines) Oil Block Adaptor "Silver One"(silver one has a fitting broke off inside of it which I will include so you can weld it on, includes all seals)
SR Oil black Adaptor(and other engines) "Black One" nothing wrong with it just went another direction, bolted up, never used
S13 Front Spindles and Hubs
S13 Rear Hub(I need to find the other one so it could be hub(S))
4x114.3 quarter inch spacers(one set of two)
Buyer pays for shipping and paypal fees, so include that in your offer.
http://i132.photobucket.com/albums/q4/thetopcow/DSCF2448.jpg
S14 Fogs(right one in pic has a rock chip in it)
S14 MAF Sensor(Intake tube and Airbox not included)
S13 SR Intercooler piping
S14 Tension Rod
S14 Front Lower Control Arms
Z32 Rear Uprights
T25 Turbo for parts
S13 Interior behind side mirror component speaker mounts(have Kick panel ones too
S13 Front and Rear Struts and Springs
S13 KA Auto Trans Stuff(torque converter, Flexplate)
R32 RB20det turbo(chipped up inducer fins, still works and produces boost fine, comes with wastegate solenoid and oil return)
http://i132.photobucket.com/albums/q4/thetopcow/DSCF2443.jpg
S13 Inner and Outer Tie Rods
KA24E Computer
S13 Factory Fuel Pump
Z32 Oil Cooler
Ebay Nismo Filter
S13 Ball joints(two fronts, and one rear)
SR(and other engines) Oil Block Adaptor "Silver One"(silver one has a fitting broke off inside of it which I will include so you can weld it on, includes all seals)
SR Oil black Adaptor(and other engines) "Black One" nothing wrong with it just went another direction, bolted up, never used
S13 Front Spindles and Hubs
S13 Rear Hub(I need to find the other one so it could be hub(S))
4x114.3 quarter inch spacers(one set of two)