brainfood
09-23-2009, 12:07 AM
Basically bought a clip from panda garage built a car for a year or so drove it at d1 for like 7 laps had a kinked pcv hose that stopped my day early. Found the problem and blasted around on the car on sunday to make sure it was okay and then parked it. Its just sitting the garage and I am thinking of going a different route so I am testing waters here. I love my sr, I love my turbo setup, car is amazing with it but thinking about trying something new.
S14 SR20DET
Wired for s13 chassis
Exedy Hyper Single
Greddy Oil Pan
Touge Factory Oil Block (similar to Tomei)
Custom oil cooler setup with sick clean bdl filter relocator
Full-Race twinscroll gt3071 setup with wastegate and custom dump tube and oil/water lines
Nismo Thermostat
Nismo Pivot for clutch
Sard 850cc injectors
Enthalpy Rom tune
z32 maf
3 core pbm radiator
custom short front mount piping 1pc hot and cold pipes to prevent boost leaks
Super clean setup and capable of good power. put it in and drive it or sell the ecu and go pfc turn up the boost and make 400+hp
Not hurting to sell it I will probably go pfc in a month or so and just keep it. Only reason I am not driving it because I am redoing the chassis. No lowballers no part outs. I am sure I am missing some shit that is included its basically everything you need as far as bolt ons. Car was never run hot, changed oil after initial startup, before and after the event.
Looking to get - $7000
email me or pm me.
[email protected]
http://i51.photobucket.com/albums/f399/brainfood1182/blog/s13p11001.jpg
http://i51.photobucket.com/albums/f399/brainfood1182/blog/BRogers49.jpg
http://i51.photobucket.com/albums/f399/brainfood1182/blog/BRogersS13103.jpg
http://i51.photobucket.com/albums/f399/brainfood1182/blog/IMG_0206.jpg
http://i51.photobucket.com/albums/f399/brainfood1182/blog/IMG_0207.jpg
http://i51.photobucket.com/albums/f399/brainfood1182/blog/IMG_0208.jpg
Car Drifting
http://i51.photobucket.com/albums/f399/brainfood1182/sponsorshippic.jpg
S14 SR20DET
Wired for s13 chassis
Exedy Hyper Single
Greddy Oil Pan
Touge Factory Oil Block (similar to Tomei)
Custom oil cooler setup with sick clean bdl filter relocator
Full-Race twinscroll gt3071 setup with wastegate and custom dump tube and oil/water lines
Nismo Thermostat
Nismo Pivot for clutch
Sard 850cc injectors
Enthalpy Rom tune
z32 maf
3 core pbm radiator
custom short front mount piping 1pc hot and cold pipes to prevent boost leaks
Super clean setup and capable of good power. put it in and drive it or sell the ecu and go pfc turn up the boost and make 400+hp
Not hurting to sell it I will probably go pfc in a month or so and just keep it. Only reason I am not driving it because I am redoing the chassis. No lowballers no part outs. I am sure I am missing some shit that is included its basically everything you need as far as bolt ons. Car was never run hot, changed oil after initial startup, before and after the event.
Looking to get - $7000
email me or pm me.
[email protected]
http://i51.photobucket.com/albums/f399/brainfood1182/blog/s13p11001.jpg
http://i51.photobucket.com/albums/f399/brainfood1182/blog/BRogers49.jpg
http://i51.photobucket.com/albums/f399/brainfood1182/blog/BRogersS13103.jpg
http://i51.photobucket.com/albums/f399/brainfood1182/blog/IMG_0206.jpg
http://i51.photobucket.com/albums/f399/brainfood1182/blog/IMG_0207.jpg
http://i51.photobucket.com/albums/f399/brainfood1182/blog/IMG_0208.jpg
Car Drifting
http://i51.photobucket.com/albums/f399/brainfood1182/sponsorshippic.jpg