PDA

View Full Version : NY FS: 2 S14 SR20DET Engine Blocks, S13 SR Heads, SR Cranks

veloz
09-21-2009, 12:28 PM
I've decided to sell off some of my SR stuff as I have too much.
Here is a list of what I have available at the moment.

1) Mint S14 SR20/T Engine Block.
I got this checked out my the machine shop and only needs a hone. 86mm stock bore.
Head straightness is within specs and has all main caps and girdles.
Block is perfect for a rebuild
Block is a virgin.
$$ - Keeping it

2)Prepped S14 SR/T Engine Block.
This is the block that I ran last year in my Silvia.
Melted #2 piston. I was already running 86.5 Pistons, so it will need an overbore to 87mm.
As a bonus, this block has been polished; yes, the block is SHINY on the inside.
The machinist had a theory that if the block is smooth inside, that the oil will circulate better.
Will need to be decked and bored
$150

3) S14 SR/T Crank
Looks good and ready to go
$150

4)S13 SR/T Bare Cylinder Head
If you need a head to build, this is it.
Head is straight, all cam caps there.
Missing some cam bolts but it is a good base to work off.
$$$ GONE

5) S13 SR/T Rebuilt STAGE 2 Cylinder Head
Everything on this head is new (rebuilt).
It was never run do to other events.
Head has been decked and comes complete with all hardware, valve cover, cam caps, etc.
Doesn't include cams BUT Includes upgraded valve springs and retainers already installed.
This is a high revving, bolt on installation.
This is 100% and good to go.
$400

A lot of this stuff is in boxes and I currently don't have any pics.
If interested, PM me

Or email at [email protected]


I'll try to get some pics up ASAP.

All items located in Toronto, Willing to ship

Thanks
dr1ft32
09-22-2009, 12:42 AM
you happen to have a s14 sr head for sale???
extra20
10-07-2009, 05:48 PM
Is the s14 block complete with crank rods an pistons?
and do u have or can u find an s14 stock head for a good price also?
veloz
10-08-2009, 10:24 AM
Is the s14 block complete with crank rods an pistons?
and do u have or can u find an s14 stock head for a good price also?


I can include Crank and rods for extra $$, but you'll need to fit pistons, rings and bearings.

you happen to have a s14 sr head for sale???

I have a Race ported/polished S14 head.
Head work was Big Money.
5 angle valve job, swirled, cut, etc.
I spent over $700 on it getting worked and rebuilt.
I probably wouldn't let it go for under a $1G

I also have stock Cams and VTC sprocket and Solenoid for S14 SR


I'll get pics up As soon as I can.

Thanks
s14.kouki
10-08-2009, 12:10 PM
ill take 1 and 4, please pm me pics before I pay you.
jivetoast
10-08-2009, 05:23 PM
ill take 1 if he doesnt, or 2
veloz
10-09-2009, 08:59 PM
Decided to keep item 1.

4 is gone.

Picks of block Follow

http://img3.imageshack.us/img3/6075/dsc034113310546.th.jpg (http://img3.imageshack.us/i/dsc034113310546.jpg/)


NOTE scoring.
Will need overbore to 87 or IRON SLEEVES
http://img246.imageshack.us/img246/3489/dsc034123313693.th.jpg (http://img246.imageshack.us/i/dsc034123313693.jpg/)



http://img185.imageshack.us/img185/1866/dsc034133316483.th.jpg (http://img185.imageshack.us/i/dsc034133316483.jpg/)

http://img25.imageshack.us/img25/8121/dsc034163319557.th.jpg (http://img25.imageshack.us/i/dsc034163319557.jpg/)

http://img246.imageshack.us/img246/4703/dsc034173321829.th.jpg (http://img246.imageshack.us/i/dsc034173321829.jpg/)

http://img408.imageshack.us/img408/2029/dsc034183324498.th.jpg (http://img408.imageshack.us/i/dsc034183324498.jpg/)

http://img185.imageshack.us/img185/792/dsc034193327702.th.jpg (http://img185.imageshack.us/i/dsc034193327702.jpg/)
veloz
10-09-2009, 09:04 PM
ADDING A FEW ITEMS

Nismo rear Toe arms - $80 plus shipping


http://img193.imageshack.us/img193/6107/nismoreartoearms1382042.th.jpg (http://img193.imageshack.us/i/nismoreartoearms1382042.jpg/)

http://img198.imageshack.us/img198/9136/nismoreartoearms3822810.th.jpg (http://img198.imageshack.us/i/nismoreartoearms3822810.jpg/)

Blitz BOV intermediate pipe - $40 plus shipping

http://img28.imageshack.us/img28/7785/blitzbovpipe13824983.th.jpg (http://img28.imageshack.us/i/blitzbovpipe13824983.jpg/)

http://img196.imageshack.us/img196/4520/blitzbovpipe3817430.th.jpg (http://img196.imageshack.us/i/blitzbovpipe3817430.jpg/)
JRex
10-09-2009, 10:01 PM
How much for the crank shipped to 32608?
veloz
10-12-2009, 10:19 PM
S13 head Pics.

I could slap this on an engine as soon as you get it.
Powdercoated valve cover included


http://img106.imageshack.us/img106/4832/dsc034816568514.th.jpg (http://img106.imageshack.us/i/dsc034816568514.jpg/)





http://img26.imageshack.us/img26/3794/dsc034856582202.th.jpg (http://img26.imageshack.us/i/dsc034856582202.jpg/)





http://img26.imageshack.us/img26/2904/dsc034886589862.th.jpg (http://img26.imageshack.us/i/dsc034886589862.jpg/)

http://img106.imageshack.us/img106/829/dsc034896592455.th.jpg (http://img106.imageshack.us/i/dsc034896592455.jpg/)

http://img26.imageshack.us/img26/5205/dsc034916603189.th.jpg (http://img26.imageshack.us/i/dsc034916603189.jpg/)

http://img26.imageshack.us/img26/5723/dsc034926605519.th.jpg (http://img26.imageshack.us/i/dsc034926605519.jpg/)





S14 Head - $1100

As a note, I wasn't planning on selling it, but I've had some requests so here it goes.


http://img517.imageshack.us/img517/7897/dsc034955694065.th.jpg (http://img517.imageshack.us/i/dsc034955694065.jpg/)



http://img26.imageshack.us/img26/412/dsc034975701646.th.jpg (http://img26.imageshack.us/i/dsc034975701646.jpg/)

http://img106.imageshack.us/img106/9541/dsc034985703841.th.jpg (http://img106.imageshack.us/i/dsc034985703841.jpg/)

http://img517.imageshack.us/img517/4576/dsc034995707206.th.jpg (http://img517.imageshack.us/i/dsc034995707206.jpg/)

http://img160.imageshack.us/img160/3828/dsc035005710595.th.jpg (http://img160.imageshack.us/i/dsc035005710595.jpg/)

http://img339.imageshack.us/img339/7830/dsc035025713612.th.jpg (http://img339.imageshack.us/i/dsc035025713612.jpg/)

http://img26.imageshack.us/img26/7816/dsc035085715922.th.jpg (http://img26.imageshack.us/i/dsc035085715922.jpg/)


http://img106.imageshack.us/img106/1149/dsc035165686360.th.jpg (http://img106.imageshack.us/i/dsc035165686360.jpg/)http://img26.imageshack.us/img26/4508/dsc035175689316.th.jpg (http://img26.imageshack.us/i/dsc035175689316.jpg/)

Comes with :

Ported and polished intake and exhaust
Fancy Intake ports
5 angle valve job
Tomei Type A Springs
Tomei RAS
VVL Sprocket w stock cams
VVL Solenoid
All head hardware, cam caps included - complete with every bolt
Paint Stripped valve cover
Head will come complete with everything you need to build it.

All this needs is to be hotanked and resurfaced and you are good to go.

If you are interested,
The price is $1100 plus shipping

I don't want to part anything out

I'm quite firm on the price as I would easily keep it.

Cheers
nOaAAa
10-13-2009, 12:35 AM
with the #5 all that would be needed to install onto an sr20 is cams?! does it come with cam gears?

please pm the lowesta price shipped to 90278... sorry if that sound lowballish already... kinda strapped for cash!

also any vouches for this since you have only 5 posts... thanks
NewfoundlandDude
10-13-2009, 05:43 AM
I haven't seen this stuff, but I can vouch for Veloz.
He bought an S14 long block from me last spring, no issues, great guy.
He also just helped me locate and buy an S14 longblock out of province.

Legit/honest seller. I'm sure you'll have no issues.
JesusFreakDrifter
10-13-2009, 09:06 AM
can an s14 crank fit in an s13 block????hopefully this isnt a noob question
veloz
10-13-2009, 10:43 AM
with the #5 all that would be needed to install onto an sr20 is cams?! does it come with cam gears?

please pm the lowesta price shipped to 90278... sorry if that sound lowballish already... kinda strapped for cash!

also any vouches for this since you have only 5 posts... thanks


All you need for the S13 head is cams.
I do have a stock exhuast cam w/gear I can include.
You'll have to find an intake cam yourself.

Price is pretty firm.


I realize I have only 5 post on this forum, but I've been into thse cars for a while and have a lot of stuff.
If it would make anyone feel better, i'd be happy to toss these up on EBAY for you.

I don't have the space nor time i used to have so I'm getting rid of a lot of stuff.



As a quick note, lowballers will be ignored as I'm NOT hurting for cash.

If you want to make a deal for a complete engine in pieces or something along those lines, I'd be willing to work that out as well.



Thanks Jon.
Much appreciated.
FYI - That motor is currently in my car right now - runs great
Like I said, let me know when you receive the engine i sent over.




I have 2 S14 and 1 S13 crank.
I would love to double check the part numbers but my storage is an hour away.

It is my understanding that S13/S14/S15 cranks are interchangeable.
I'll let the guru's confirm or deny this.
veloz
10-17-2009, 12:12 PM
Nismo arms are sold.

Other stuff up for grabs
Red Dragon3
01-14-2010, 11:15 AM
WTB SR20DET Cam Cap Bolts. 2 Medium Bolts (2.25 in) and 2 Short Bolts (1.5 in)
WTB SR20DET Water Inlet Thermostat Housing Neck
PM ME!
racerx2k1
01-14-2010, 03:02 PM
Last Activity: 12-07-2009 02:11 PM