Log in

View Full Version : please help, sr injectors


onesloka
09-16-2009, 10:35 PM
I installed new injector o-rings in my red top due to one of the lower ones leaking. When i was done installing i left my fuel rail out of the manifold to pressurize and make sure there where no leaks (same way i found the leak). There is no leak what so ever, and i drove fine for a few miles. Now the problem is it doesn't want to idle right all of the sudden, and the exhaust pops a lot when slowing down in gear. I don't know what to look for now.

Also when i installed the o-rings i lubed them really good to prevent breaking them. I did end up breaking the thin plastic circle that the upper grommet sits in but there is still nothing leaking under the cap of the injector. What would cause this all of the sudden? Before the injector started leaking neither of these things happened.

steve shadows
09-17-2009, 01:00 AM
What Engine is this? year and be specific

What Injectors are you currentlyusing? what were you using before.

What is your Engine Management?

onesloka
09-17-2009, 02:14 AM
Its a completely stock red top sr. It was the stock injectors that had a leaky o-ring. Stock ecu as well.

onesloka
09-17-2009, 04:50 PM
does anyone have any ideas?