COMPLETE SR20 Swap. Rebuilt, LOOK! cheapppp

[JDMtyteYO!]

ok, so i have a chance to get a great deal on a RB20...but this has to go first since i have NO money..

Brand New...
OEM Rods
OEM Pistons/Rings
ARP Rod Studs
ARP Main Studs
ARP Head Studs
Cosworth 1.5mm Headgasket
ALL 12 Freeze Core plugs were replaced
Balanced and lightly knifed Crankshaft
All New gaskets
ACL race main and rod bearings
Precision RC61 series Turbo .63 exhaust, .60 compressor
ISIS intake mani
ISIS lightweight Underdrive
Hybrid intercooler
Greddy type-S BOV
Brand new OEM water pump
Brand new Nismo colder thermostat
Enjuku lightweight pulley set
Morosso oil pan
S14 oil pickup
Koyo Rad
Samco red hoses
Tomei 555cc injectors
RS Enthaply tuned ECU
RS Enthaply wiring harness
Greddy rocker arm stoppers
New OEM front and rear main oil seals
new OEM Oil pump
Aeromotive fuel pump
Nismo FPR
All new Hybrid 4-ply intercooler hoses
HDI intercooler
Intake
Z32 MAF
Found out the new tranny i got was rebuilt by Big Wave automotive Shifts like a new tranny! feels amazing!
ISIS V.2 Short Shifter (INSANEEELY SMOOTH!)
Nismo Shift knob

Motor has right over 1400 miles on it, no leaks, no problems what so ever!
Will take a video of the car running and driving.
This is for the COMPLETE swap. you buy, you drop it right in and drive it. No B.S. I rebuilt this motor to handle power but its not a built motor so you dont have to worry about it blowing up or anything. ive already hit 30lbs but just once cuz i was curious, dont worry it wasnt detonating, i let off right when i seen 30. its built to put down good decent numbers without sacrificing reliability. At 10lbs its around 260-270whp
ASKING -
$6,000 OR BEST OFFER
Will sell cheaper without turbo and wastegate
Send me a PM.
Email - [email protected]
Call/Text - 561-818-2718
Located in Lake Worth, FL
Will Travel to Meet at Buyers Expense
Will Ship at Buyers Expense
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1480.jpg
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1481.jpg
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1483.jpg
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1485.jpg
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1521.jpg
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1522.jpg
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1523.jpg
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1524.jpg
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1528.jpg
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1525.jpg
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1534.jpg
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1535.jpg
http://i12.photobucket.com/albums/a220/burninskulls0911/DSCN1538.jpg

[JDMtyteYO!]

Make an Offer!
Will also trade for complete RB20/RB25 Swap!

[wings_s13]

glws man, this is a very nice motor. not alot of people take the time to do a rebuild right lol. Do u have the wire harness?? also do u have the ecu 62 0r 63?
IF u do please let me know thanks

[JDMtyteYO!]

Thanks a lot man, I wanted to do it right and not go overboard and then it blow up cuz built motors are too sensitive for me. I drive this thing daily too so it's very reliable, get awesome gas mileage and still drift whenever and where ever you want. It comes with rom tuned ecu by enthalpy and yea it comes with the wiring harness. Ecu number is 62, I don't have a extra one tho.

[4-20sx]

got any vids of the engine running? i do have an rb25det series 2 sitting at home with a greddy intake manifold minus turbo uncut harness w/ ecu and with crossmember. I was originally gonna use it on my s14 but just recently had a kid so i have no real use for it now....just trying to get rid of it...i would sell it for pretty cheap if you wanted it..

[JDMtyteYO!]

got any vids of the engine running? i do have an rb25det series 2 sitting at home with a greddy intake manifold minus turbo uncut harness w/ ecu and with crossmember. I was originally gonna use it on my s14 but just recently had a kid so i have no real use for it now....just trying to get rid of it...i would sell it for pretty cheap if you wanted it..

SH$$ lol!
i knew i shouldnt have started tearing it apart BUT luckily i havnt drained any of the fluids and all i took off was the wiring harness and intercooler piping. i can throw all that stuff back on and make a video probably tomorrow. Ill send you a PM shortly...

[singlecamslam]

Random question, how do you like the ISIS intake mani? Is it better than most of the Freddy knockoffs?

[Jordan249]

Damn, I only have like half of the asking price haha. Gl man

[JDMtyteYO!]

Damn, I only have like half of the asking price haha. Gl man

Well im not done taking the motor out yet so you got some time lol!


Random question, how do you like the ISIS intake mani? Is it better than most of the Freddy knockoffs?

I actually love it. its hella cheap. its a little better then the ebay ones. its still a knockoff but ive never had any problems with it and the polished actually looks pretty damn good too. if i were, id buy another one in a heartbeat

[aNskY]

dex-cool is a no-no in a sr.

just a fyi OP

[wings_s13]

well whats the ecu tuned for?? well if some one buys this and they dont need the
wire harness or the ecu please let me know i need them lol. GLWS
some one buy this, seems to be done right, looks great and well is going to be alot more relible then some over sea's front clip that has 50k on it.

[JDMtyteYO!]

Never used dex-cool. Only 2 bottles of DEI additive and rest water.

Well you need this ecu for the motor to run good, it's tuned for the turbo and injectors. Thanks for the kind words

[aNskY]

Never used dex-cool. Only 2 bottles of DEI additive and rest water.



Aluminum radiator, aluminum block, aluminum head, silicone hoses.... nothing to rust...
So where did the "rust" in the outlet come from?

[JDMtyteYO!]

these were taken before the motor was ever started. Waternecks were never hot tanked. It WILL rust..it had a small water leak underneath the intake manifold where the water temp sensor is and it did rust. That was only with water and DEI or water wetter.

[aNskY]

alright, ill give you the benefit of the doubt.

but i still think youre silly for going rb20 over a built sr.

;)

free bump for you lol

[BadazzSr20]

hey bro i live right next to you!! did u do the build urself. are you will to part it out. if your going to part it out i want a few parts. we should hang sometime you ever goto the race meets at hooters on thurday?

[JDMtyteYO!]

corrosion/rust same thing lol haha
idk, my friends have me convinced on an RB
thanks lol

[djstatistics]

Hm, would you WTT for a RB25DET?

[JDMtyteYO!]

Bunmmmp
more looking for trades now

[wideride]

Make an Offer!
Will also trade for complete RB20/RB25 Swap!

whats your base price before i make offer.
pm me please!!!

[tig_tech]

Keep the SR. RB20 is poopoo. SR has 50hp per cylinder compared to a RB20 with 35hp per cylinder. Anything 6 cylinder and a 2.0liter is trash. Go with the RB25 instead.

[gotspins13]

i was just going to offer my rb20 to you, runs 100% great no problems with it whats so ever, tuned ecu and some internal work.
but your in florida=[

[racerx2k1]

3 month old thread.