Brand new set of Drift Freaq custom urethane KA/SR engine mounts.

[drift freaq]

This is a brand new set high durometer Polyurethane engine mounts $120 is the price.
I used to sell these all the time in a group buy here many people have run or run them.

They do not have solid rods all the way through so they do not transfer vibration. They are made from high durometer Urethane.
Not Polyurethane tubes or Industrial urethane window caulk you buy at Home Depot.
The mounts are track tested and have been used on many race cars. (THIS SET IS NEW) I am talking about these mounts in General.

They are stiffer than Nismo mounts, but not bone jarring, in fact they are quite nice. They keep your engine from moving, in fact it sits nice and still.

Oh and if you are going to use these on a turbo car? I suggest strongly you keep your exhaust side stock heatshield and use it with these.

http://i705.photobucket.com/albums/ww52/driftfreaq/IMG_0573.jpg

[JEDIs13]

these are fucking sick. i need to get a set for my car when i have some extra spending money

[karl wasabi]

You only have one set ATM?

Do they lower the motor at all?

[drift freaq]

You only have one set ATM?

Do they lower the motor at all?

actually more are available. I do have one set advertised. Yes they lower the engine around 1/2 inch to an inch.

[Team DET]

if you run out of these can you make some more in the future lmk thank's

[drift freaq]

if you run out of these can you make some more in the future lmk thank's

yes I can.

[rat240]

Technical Articles: Make Your Own Motor Mounts - Here's How (http://www.nicoclub.com/articles.php?id=215490)
are these the same

[drift freaq]

Technical Articles: Make Your Own Motor Mounts - Here's How (http://www.nicoclub.com/articles.php?id=215490)
are these the same

Ah no and you fail at reading. If you read my initial post you would see that I stated these mounts do not have a stud running all the way through.

That is a big fail as the stud transfers tension and vibration straight through the mount to your chassis from the engine. You might as well bolt your engine brackets straight to your crossmember with those mounts LOL can we rattle your teeth.

On top of that this is high durometer high quality urethane, not some cheap as home brew flexane shit.

Look at the pics of my mounts. The studs are offset. The urethane is nicely formed not some dixie cup bullshit.

[bardabe]

Mounts are supper legit, just be sure to keep heat shields, so you don't risk premature wear. mounts are awesome dave's legit

[drift freaq]

back on up for this.

[mayco_86]

nice strong set up

[K_style]

I like the color dave..

[Pacman]

How about making a transmission mount and I'll pick up all three from you? I need new mounts all around and like things matching (even if I can't see them)!

[drift freaq]

How about making a transmission mount and I'll pick up all three from you? I need new mounts all around and like things matching (even if I can't see them)!

Ah I will take it on advise but don't expect it to happen anytime soon. Doing a mock up and then a production run is not cheap.

I honestly do not see a big enough market to warrant the expense of trying to do a tranny mount.

[drift freaq]

back to the top

[Pacman]

BOOOOOOOOOOO!!!!!! Ok then, what trans mount would you recommend with the engine mounts?

[drift freaq]

BOOOOOOOOOOO!!!!!! Ok then, what trans mount would you recommend with the engine mounts?

Well in the past I sold Nismo trans mounts with them. Seeing as I can give you the Nismo trans mount for $45 and the shipping on all three still remains the same at $15. So it would be $180 shipped for all three with paypal