PDA

View Full Version : TX JE Forged 11.1 KA24de pistons


MrHolister
09-06-2009, 11:34 PM
Brand NEW in the box. JE 11.1 forged pistons. I was going to do a high compression build, but bills are nipping at me and I doubt I will be able to finish the project. These will work with no valve clearance issues at all. They are a GREAT upgade if you are already rebuilding an engine. They up the power by about 30 hp alone from what I've seen in other's builds.

Will take $450 shipped. Will sell H beam eagle rods (also brand new) and ported KA head all together for $800

469-735-3162 Please Text.

Located in DFW Texas. Will ship.

http://i438.photobucket.com/albums/qq101/MrHolister/P090509094318.jpg

http://i438.photobucket.com/albums/qq101/MrHolister/P090509094343.jpg

Pirate_Freder
09-07-2009, 02:07 AM
...? 30hp you say? last I checked high compression pistons gave minimal power gains. Take for example ajax and his 10.5:1 fully built ka24de, he's pulling a little under 180hp with many other mods.

Of course if you can point us to these builds that you speak of where people got such gains then please do. I myself am working on an N/A build and plan on going with high compression.

Walperstyle
09-07-2009, 06:06 AM
11:1 ouch thats high

MrHolister
09-07-2009, 07:15 AM
...? 30hp you say? last I checked high compression pistons gave minimal power gains. Take for example ajax and his 10.5:1 fully built ka24de, he's pulling a little under 180hp with many other mods.

Of course if you can point us to these builds that you speak of where people got such gains then please do. I myself am working on an N/A build and plan on going with high compression.

Maybe I should have been clearer... With appropriate supporting mods, these can net that much. 10.5:1? SOHC pistons maybe? There has always been back and forth about on what the ACTUAL compression those end up being. All depends on headgasket, etc...

My friend Bruce has a very nice NA KA that uses these pistons. He runs 93 oct, stock injectors, BC stage 2 cams, and a header of some brand. With the cams degreed properly(which I would hope anyone would think of doing...but I NEVER see), he is making very nice power. Understand there is a lot of difference between cast OEM pistons and RINGS (blow by etc...) than forged units..

If you are interested in making me an offer, please feel free. I have no desire to make this a discussion thread and it seems like all comments so far have been negative.

Anyways, thanks for looking and feel free to call me if you have questions.

MrHolister
09-09-2009, 07:30 AM
I also have other internals as well... but I would like to sell these first.

Price will INCLUDE shipping.

pumped4show
09-09-2009, 08:18 AM
what else do you have??
I'm currently rebuilding my dohc, so you might have something I need.
The pistons compression ratio is too high for my build, but post your other stuff!

macidcrook
09-11-2009, 01:36 PM
where is the price??? or is it a make an offer?

turbo2nr
09-11-2009, 02:14 PM
some one throw these in their motor with some good rods, e85 and 15psi of boost. you'll have a fast car!

project-D180
09-11-2009, 04:52 PM
im runnin these right now and i am creamming myself every time i go driving..

silnismo
09-11-2009, 07:08 PM
You should put a price, or prepared to be lowballed.

MrHolister
09-15-2009, 07:17 AM
I apologize...lol. I thought I had put the price.

It's $450 for the pistons shipped.
It's $800 if you want new eagle h beam rods and a ported KA head as well..

ze12o
09-15-2009, 09:12 AM
how much for just the rods?

MrHolister
09-15-2009, 05:53 PM
how much for just the rods?

I don't intend on parting with them seperately. I have every intention however of using these parts on my own build if they don't sell. I am just in a slight financial crunch..

ze12o
09-16-2009, 12:52 AM
alright glws

Walperstyle
09-17-2009, 09:36 AM
how much for the ported head? is it a full head, what cams? reply to [email protected]

MrHolister
09-17-2009, 10:21 PM
how much for the ported head? is it a full head, what cams? reply to [email protected]
$250 plus shipping for the head. No cams, valves...etc.. just the head and cam caps..

MrHolister
09-19-2009, 10:45 PM
I am interested in trades as well... let me know.

MrHolister
09-30-2009, 07:29 AM
Bump/ Willing to accept lower offers.

MrHolister
10-18-2009, 02:14 AM
Still for sale. I have been away from the computer. All PMs replied.

racerx2k1
10-18-2009, 09:33 AM
I am interested in trades as well... let me know.

Bump/ Willing to accept lower offers.

Still for sale. I have been away from the computer. All PMs replied.

2 bump limit. You can start new thread in 3 days.