PDA

View Full Version : MD SR20 Race Engine part out, RWD SR20VE parts, Turbo, A LOT of stuff...


Brian W.
08-31-2009, 10:35 PM
Just about new SR20VE Cyl head, as in it has no events on it and only 1 hour of dyno time. IT has a competition radius valve job, it has been cleaned, pressure tested and resurfaced. Inside it has stock SR20VE cams which were cleaned and polished, and Super Tech HEAVY DUTY dual valve springs and Ti Retainers. Supertech Oversized stainless valves also. This head has everything you need and nothing you dont. Sure it will come with the valve cover and everything inside of it. HKS oil cap not included SOLD!!!!!
http://i79.photobucket.com/albums/j123/JDMFresh/S7300034-1.jpg
http://i79.photobucket.com/albums/j123/JDMFresh/S7300035-1.jpg

Custom fabricated long runner intake manifold for RWD SR20VE application. Has Velocity stacks and long runner for a broad torque curve. Uses Q45 throttle body. Will come with Throttle body,Throttle cable bracket, brace for intake mani, and re-usable thermal intake mani gasket. Has 2 holes under the plenum for 3/8" npt whatever you want. $1200 obo
http://i79.photobucket.com/albums/j123/JDMFresh/S7300020.jpg
http://i79.photobucket.com/albums/j123/JDMFresh/S7300021.jpg


Custom fabricated 304 stainless steel Exhaust manifold for RWD SR20VE application. T3 flanged and Tial 44 vband flanged. Was designed around S256 turbo in S13 but should work with other setups, but may get to close to BMC. Has small EGT bung for my AIM dash, but that can be plugged or welded shut. Its a small metric thread but i forget what it is exactly. $800 obo (a little dirty in the pic, i didnt clean it off since taking the engine out and apart)
http://i79.photobucket.com/albums/j123/JDMFresh/S7300029-1.jpg

Sard Top feed fuel rail for SR20DET. comes with fittings(pretty sure i have that one where the regulator is if not i can get one and sell it with it, no sweat. its in good shape and its not purple, its gold. I dont have any of the hardware for it as it was always used on custom intake manifolds(threw all that shit out when i bought it new). but you can get hardware and make some spacers for it REAL easy. its -6an in and out. holler. $160 oboSOLDD!!!!!!!!!
http://i79.photobucket.com/albums/j123/JDMFresh/S7300026-1.jpg

Power Enterprise TL1000 Top feed injectors. Dual nozzle, read up on them. These things are awesome, i recently had them cleaned in the beginning of the season and they are still as awesome as they have ever been which is pretty awesome. Lets say an awesome price of about $425 obo
http://i79.photobucket.com/albums/j123/JDMFresh/S7300025-1.jpg

ATI super damper w/ custom machined 60-2 tooth trigger wheel that sandwiches behind the P.S. pulley. It has 5mm milled off the back to compensate for SR20VE oil pump drive but i have a spacer from ATI that is 5mm thick that would take it back to stock(i.e. can be used on rwd SR no prob w/ spacer). if you are using this on an rwd SR setup i will include a 3 rib PS pulley and a spacer for that pulley and the correct belt for an extra $25) $425 obo
http://i79.photobucket.com/albums/j123/JDMFresh/S7300036-2.jpg

Fabricated aluminum (SUPER THICK!) mag sensor bracket for the above crank pulley. Bolts where AC compressor used to go, comes with used 1/2" mag sensor. $125 obo
http://i79.photobucket.com/albums/j123/JDMFresh/S7300023-1.jpg


Bullseye Power S256 Turbo w/ stainless .55AR exhaust housing. Has 3" vband flange welded to discharge flange surface. just rebuilt and has 1 hour of dyno time on it. 2.5" cast aluminum elbow welded on and 1/8" npt boost source. $920 obo
http://i79.photobucket.com/albums/j123/JDMFresh/S7300032.jpg
http://i79.photobucket.com/albums/j123/JDMFresh/S7300033.jpg

Griffin Custom Intercooler Core to fill every bit of the space under the core support of an S13 and probably S14 too. Has 3" outlet and 2.5" inlet. Great shape, used for 1.5 seasons. SOLD!!!!!
http://i79.photobucket.com/albums/j123/JDMFresh/S7300039-2.jpg
http://i79.photobucket.com/albums/j123/JDMFresh/S7300040-2.jpg

Greddy Oil Pan for SR... great shape. $250
SOLDDDDDDDDD!!!!!!!

Custom made aluminum coolant reservoir tank. I made this in the beginning of 08. It took me like 4 hours to make! its polished and bolts in the factory location on S13s. i want $160 for it.
http://i79.photobucket.com/albums/j123/JDMFresh/S7300043-1.jpg

SR20DET oil filter block thing. I think its circuit sports? its the blue one. I have -10 fittings in it instead of the -8 it comes with. Also whatever other fitting is in it, i think its a -4 i used for my oil pressure sensor remote mounting. $120 shipped obo
http://i79.photobucket.com/albums/j123/JDMFresh/S7300024-1.jpg

Kugoka(sp?) Oversized water pump pulley. Slow down your water pump, run cooler! $80.00 ShippedSOLD!!!!!!
http://i79.photobucket.com/albums/j123/JDMFresh/S7300027.jpg

Custom made aluminum coolant surge tank. Has 2 -4an fittings on the top side and a -10an bung on the bottom. The brackets welded to it are to bolt on to the front of a RWD SR20VE setup(the top bracket might even work on standard RWD SR heads, where it bolts onto the valvecover, but you could cut them off and use this on anything, which is what ill probably do if no one buys it. Comes with Yashio Factory rad cap. $150 SOLD!!!!!
http://i79.photobucket.com/albums/j123/JDMFresh/S7300022.jpg

Water Neck, coolant outlet for SR20VE cyl head with thermo housing for RWD block. has metric thread thread for water temp sensor, 1/4" npt thread for whatever(has plug in it now) and the end is tapped for 1/2" npt where i have a -8 line connecting the two parts. this is for a race setup that does not use a heater core. Thermo housing has gutted thermostat in it and and a -10 bung welded on for a coolant surge tank $100
http://i79.photobucket.com/albums/j123/JDMFresh/S7300028-1.jpg

Cusco Engine mounts. Well used, but still work great. one of them is missing the locating stud on the top, once installed it doesnt matter. $100 shipped obo.
http://i79.photobucket.com/albums/j123/JDMFresh/S7300030-1.jpg

Samco S13 SR20ET PURPLE radiator hoses. I special ordered these, they took 3 months to get, literally. They are a little dirty, but would clean up well with some acetone or whatever kind of cleaner. Also they are shortened so they didnt kink when used with an oversized radiator(i.e. they might not be long enough for a stock rad) $85 Shipped
http://i79.photobucket.com/albums/j123/JDMFresh/S7300038.jpg

Sweet Griffin custom aluminum oil cooler. 3" thick, has drain on it for oil changes... DUH! -10an in and out welded on and has some brackets welded on that were specific to my car, you can cut them off and add your own or make some to connect to them. (no lines included) $200 shipped obo
http://i79.photobucket.com/albums/j123/JDMFresh/S7300044-1.jpg
http://i79.photobucket.com/albums/j123/JDMFresh/S7300045-1.jpg

Electromotive Tec GT Standalone ECU. These things are great, one of our most popular ECUs to use and tune here at the shop(next to PFC). Comes with freshly made engine harness for my SR22VET engine, but you can change the injector plugs and pretty much use it on SR. Also included is a set of DFUs(coilpacks) and a sweet aluminum bracket that mounts the DFUs behind the pass. side strut tower of an S13. Moroso plug wires to match included. $1600 obo
http://i79.photobucket.com/albums/j123/JDMFresh/S7300042.jpg
http://i79.photobucket.com/albums/j123/JDMFresh/S7300037-2.jpg

Pics of everything in this photobucket account:
Pictures by JDMFresh - Photobucket (http://s79.photobucket.com/albums/j123/JDMFresh/)


this leaves a lot of things off that i will just keep or will sell for the right price. Ill probably keep the wastegate, BOV, FPR as i might turbo something soon. This also leaves the VE oil pump in great shape, the VVL feed block, modded solenoid and and lines and modded upper oil pan for drain back. a sweet 3" downpipe for that turbo/ mani combo. Distributor plug thing, 4" intake pipe! intercooler pipes for this entire setup. turbo lines! Some of these things ill throw in if you buy a combo of items to make this all work together.

for fastest response EMAIL me: Brian AT ma-motorsports DOT com or call the shop and just ask for me.

yokotavia
09-01-2009, 12:42 AM
Nopeeee, your stayin on the 1st page buddy.

Este510
09-01-2009, 02:26 AM
Just the head or is the bottom end for sale too?

Brian W.
09-01-2009, 09:37 AM
Just the head or is the bottom end for sale too?

i tried selling it as a whole and no one wanted it(or could afford it all together), so i sold the stroker bottom end to a customer. Now this is what is left.


head only, no block.

Brian W.
09-02-2009, 12:32 PM
Head Sold, IC sold.


1000 posts, it only took 5 years! woohoo

xops13
09-02-2009, 12:41 PM
fool ur tripn on your prices, those parts are not and i say NOT
valued that high.

zylvia213
09-02-2009, 01:59 PM
nice parts. whats the lowest for that S13 coolant resevoir shipped to 90026

singlecamslam
09-02-2009, 04:18 PM
That oil cooler is sexy.

Brian W.
09-02-2009, 06:35 PM
fool ur tripn on your prices, those parts are not and i say NOT
valued that high.


ok pal, i dont know which parts in particular you are speaking about, but while you're saying that... they are selling... so ponder that.


edit: oh hey, what do you know... i sold another item... coolant surge tank sold!(not resevoir)



the coolant resevoir ill do for $150 shipped for now.

terribleT1one
09-03-2009, 03:52 PM
i emailed you about the samco hoses and cusco mounts. i forgot to ask....since you shortened the hoses, will they fit a SR and koyo radiator combo? i cant tell what radiator your running to judge how thick it is

Brian W.
09-03-2009, 06:21 PM
i emailed you about the samco hoses and cusco mounts. i forgot to ask....since you shortened the hoses, will they fit a SR and koyo radiator combo? i cant tell what radiator your running to judge how thick it is

hey i dont remember getting an email about the mounts and hoses.... maybe try sending it again? its not in my spam box either.

the hoses were on a custom 3" thick griffin rad, they should work on a Koyo also though.



also updated some more sold items...

terribleT1one
09-03-2009, 08:50 PM
hey i dont remember getting an email about the mounts and hoses.... maybe try sending it again? its not in my spam box either.

the hoses were on a custom 3" thick griffin rad, they should work on a Koyo also though.



also updated some more sold items...


il measure my radiator and see if theyl fit. if you want just send me your payment info thru PM(paypal or whatever you use) and il send payment after i see if they fit. the motor mounts, which pin is broken off? they look to all be there in the pic and minus that are they in fairly good condition?

NMs14.5kouki
09-04-2009, 07:01 PM
hey im kinda interested in the turbo, still got it? pm me with some more info on it too.

Brian W.
09-07-2009, 10:11 PM
paypal to [email protected]


turbo is still available.

best bet is to email me guys.

thanks!

Brian W.
09-10-2009, 07:29 AM
WP pulley sold. still have a lot of cool stuff here guys.............

Brian W.
09-13-2009, 08:35 AM
last bump before lock and i make a new revised thread.