hoclifford
08-25-2009, 03:05 AM
Up for sale again, last time decided not to sell. However this time its now for sale at a lower price, I'll start by naming the bads.
Bad
-5th gear doesn't work (wont shift in when car is parked, or moving)
-dent still there
-car is at 140k
Good
-both front calipers are z32 30mm iron calipers
-front hubs had play but are now replaced with brand new ichiba v2 front hubs.
-rear hubs are now oem bearings instead of ichibas
-front pads are now hawk hp+
-masterbrake cylinder has been upgraded to z32 17/16 (pedal feel is alot better)
-tires are now changed to direzza star spec z1's in the front and direzza star spec dz101's in the rear
-Sold Spare set of work emotions
-New cat
-New Exhaust Mounts
-New HKS Shift Knob (hehe)
-New Peak Performance tranny mount
-Price drop
Here is the old post
Hi im selling my beloved project, sometimes sh*t happens and you gotta pick your priorities.
1990 240sx Red Hatchback 137k miles. Here are the good and bads.
Good - car drives like a dream, and has most of the neccescities and is ready for an engine swap. Pretty low miles for a 240, straight chassis all body panels and bumpers are original. Most old ratty broken things found on a 240 is fixed. Comes pretty much drift ready 4 wheels on the car and 2 wheels for spares.
Bad - Paint is good everywhere except the bumpers, and the roof. With a little bit of wax, buffer, and patience it should look fantastic. Car recently got dented by some f*cker in my neighborhood, no idea why. Looks like some fool just wasnt happy about life and decided to kick my quarterpanel in, or maybe my neighbor backed into me. (you can see damage in picture below.
http://farm4.static.flickr.com/3186/3132951902_cac6707b46.jpg?v=0
Suspension
-tein super drifts
-Ichiba 5 lug conversion front and rear. (Rear has OEM Nissan bearings now alot more solid, one OEM bearing is outside because I didn't have time to install it but it honestly is a very easy install and costs about 20 dollars to have pressed in at a local shop.)
-spl tension rods, and tie rod ends
-nismo power brace
-rear strut bar
Brake system
-New MBC (you may want to upgrade to z32) Now has z32
-30mm Z32 calipers (car comes with 2 iron ones and a spare aluminum one, long story behind this can explain, if there is an interested buyer) Now Changed both to Iron Calipers
-New brembo blanks up front
-New sp engineering slotted rotors in the rear
-car comes on some duralast gold's but i have a set of hawk hp+ that will come with the car also. (HP+ are now installed up front
-spl stainless steel brake lines up front, rear ones are not installed but will be included.
Wheels
-Set of 6 work emotions 17x9 +17 all with tires (come with the car) No more spare look up top.
Drivetrain
-Kaaz 2-way
Misc.
-New spark plugs, and ngk wires.
-most intake tubing is new oem from nissan (old was cracking)
-new battery from nissan
-vertex steering wheel, hkb hub
http://farm4.static.flickr.com/3194/3049593520_21d71e2f85.jpg?v=0
http://farm4.static.flickr.com/3042/3048753737_3a33cc3728.jpg?v=0
http://farm4.static.flickr.com/3246/3049595956_7bd5a51ab9.jpg?v=0
http://farm4.static.flickr.com/3028/3049594838_9f9be613ff.jpg?v=0
http://farm4.static.flickr.com/3025/2980820230_92ed01fbd1.jpg?v=0
http://farm4.static.flickr.com/3190/2979961505_d41343661e.jpg?v=0
http://farm4.static.flickr.com/3269/2979964771_66c024e49d.jpg?v=0
http://farm4.static.flickr.com/3219/2961679629_740f91b1d2.jpg?v=0
http://farm4.static.flickr.com/3210/2961678339_662db1e6f0.jpg?v=0
http://farm4.static.flickr.com/3290/3157549176_a586f95aa4.jpg?v=0
http://farm4.static.flickr.com/3097/3156716279_eda0e5c06c.jpg?v=0
http://farm4.static.flickr.com/3125/3157547388_064bcb0084.jpg?v=0
Car is yours for 3500. If you dont like the price dont buy it, im going away for school in 4 days. If i dont sell it ill just leave it at home. Even with a broken 5th in my opinion this car with a clean chassis is worth that amount, if you don't want to pay 3500 for this car please dont waste my time. I put the bads in the front of the ad to waste as little as your time as possible, so dont waste my time.
Btw cars engine runs ****ing strong, some idiot thought the engine ran like sh*t cause i said it was perfect for a swap....
You can contact me at [email protected]
Bad
-5th gear doesn't work (wont shift in when car is parked, or moving)
-dent still there
-car is at 140k
Good
-both front calipers are z32 30mm iron calipers
-front hubs had play but are now replaced with brand new ichiba v2 front hubs.
-rear hubs are now oem bearings instead of ichibas
-front pads are now hawk hp+
-masterbrake cylinder has been upgraded to z32 17/16 (pedal feel is alot better)
-tires are now changed to direzza star spec z1's in the front and direzza star spec dz101's in the rear
-Sold Spare set of work emotions
-New cat
-New Exhaust Mounts
-New HKS Shift Knob (hehe)
-New Peak Performance tranny mount
-Price drop
Here is the old post
Hi im selling my beloved project, sometimes sh*t happens and you gotta pick your priorities.
1990 240sx Red Hatchback 137k miles. Here are the good and bads.
Good - car drives like a dream, and has most of the neccescities and is ready for an engine swap. Pretty low miles for a 240, straight chassis all body panels and bumpers are original. Most old ratty broken things found on a 240 is fixed. Comes pretty much drift ready 4 wheels on the car and 2 wheels for spares.
Bad - Paint is good everywhere except the bumpers, and the roof. With a little bit of wax, buffer, and patience it should look fantastic. Car recently got dented by some f*cker in my neighborhood, no idea why. Looks like some fool just wasnt happy about life and decided to kick my quarterpanel in, or maybe my neighbor backed into me. (you can see damage in picture below.
http://farm4.static.flickr.com/3186/3132951902_cac6707b46.jpg?v=0
Suspension
-tein super drifts
-Ichiba 5 lug conversion front and rear. (Rear has OEM Nissan bearings now alot more solid, one OEM bearing is outside because I didn't have time to install it but it honestly is a very easy install and costs about 20 dollars to have pressed in at a local shop.)
-spl tension rods, and tie rod ends
-nismo power brace
-rear strut bar
Brake system
-New MBC (you may want to upgrade to z32) Now has z32
-30mm Z32 calipers (car comes with 2 iron ones and a spare aluminum one, long story behind this can explain, if there is an interested buyer) Now Changed both to Iron Calipers
-New brembo blanks up front
-New sp engineering slotted rotors in the rear
-car comes on some duralast gold's but i have a set of hawk hp+ that will come with the car also. (HP+ are now installed up front
-spl stainless steel brake lines up front, rear ones are not installed but will be included.
Wheels
-Set of 6 work emotions 17x9 +17 all with tires (come with the car) No more spare look up top.
Drivetrain
-Kaaz 2-way
Misc.
-New spark plugs, and ngk wires.
-most intake tubing is new oem from nissan (old was cracking)
-new battery from nissan
-vertex steering wheel, hkb hub
http://farm4.static.flickr.com/3194/3049593520_21d71e2f85.jpg?v=0
http://farm4.static.flickr.com/3042/3048753737_3a33cc3728.jpg?v=0
http://farm4.static.flickr.com/3246/3049595956_7bd5a51ab9.jpg?v=0
http://farm4.static.flickr.com/3028/3049594838_9f9be613ff.jpg?v=0
http://farm4.static.flickr.com/3025/2980820230_92ed01fbd1.jpg?v=0
http://farm4.static.flickr.com/3190/2979961505_d41343661e.jpg?v=0
http://farm4.static.flickr.com/3269/2979964771_66c024e49d.jpg?v=0
http://farm4.static.flickr.com/3219/2961679629_740f91b1d2.jpg?v=0
http://farm4.static.flickr.com/3210/2961678339_662db1e6f0.jpg?v=0
http://farm4.static.flickr.com/3290/3157549176_a586f95aa4.jpg?v=0
http://farm4.static.flickr.com/3097/3156716279_eda0e5c06c.jpg?v=0
http://farm4.static.flickr.com/3125/3157547388_064bcb0084.jpg?v=0
Car is yours for 3500. If you dont like the price dont buy it, im going away for school in 4 days. If i dont sell it ill just leave it at home. Even with a broken 5th in my opinion this car with a clean chassis is worth that amount, if you don't want to pay 3500 for this car please dont waste my time. I put the bads in the front of the ad to waste as little as your time as possible, so dont waste my time.
Btw cars engine runs ****ing strong, some idiot thought the engine ran like sh*t cause i said it was perfect for a swap....
You can contact me at [email protected]