what the hell ??????

[beatnikz]

i just did a 5 speed swap and head gasket change and resufaced the heads and my car wont start i did a compression test and the number were 115 60 90 113 can some one help me from what it looks like to me i think the block is warped

[NINJASPY]

did you do both the 5speed swap and headwork at the same time?

please explain more, we cant help if we dont know what you did or didnt do etc,etc....

[blueshark123]

time for a swap????

[Sileighty_85]

verify mechanical timing is correct IE: cam timing

[beatnikz]

how do we check the cam timing ...yea we did both the head work and the 5 speed swap at the same time but its still the same block and when we were trying to start it and it started smoking

[Sileighty_85]

Set crank at TDC and make sure cam lobes face correct direction with correct chain link space.

http://i73.photobucket.com/albums/i235/Neil_85/Miyukis%20Silvia/DSCN1078.jpg

http://i73.photobucket.com/albums/i235/Neil_85/Miyukis%20Silvia/DSCN1075.jpg

http://i73.photobucket.com/albums/i235/Neil_85/Miyukis%20Silvia/DSCN1076.jpg

[jspeedm]

did you use new head bolts?

[S14_Kouki]

it would be hard to warp a iron block. this is a ka we r talking about right??

[240sxjohny]

well if you resurfaced it and replaced gaskets you should be fine unless you didnt change all the gaskets that you needed to and you probably have bad rings because your other pistons have less than normal compression but the other two are bad you need to seal everthing correctly and check if your valves are in good shape aswell =]

[AznXstazy]

guessing those are cold compression numbers? check your headstuds to make sure they're torqued down right. and check timing and firing order. even with bad compression it should start but run like shit.

[beatnikz]

firing order is right and timing is fine