PDA

View Full Version : more ka24de problems part 2


Nibras
07-30-2009, 12:29 PM
Alright so i managed to keep the car at a idle and i think i am not missing on cylcders 2 and 4 anymore

however the problem has flipped , my car will idle and when i give it throttle the car will start to die immediatly unless i press the throttle more, i am thinking there is a vacume leak or something to do with afuel , i smell a strong fuel scent also ,


any ideas?

voodoo_child
07-30-2009, 12:36 PM
if you have a vacuum leak it will affect you fuel mixture thats why your smelling gas or unburn fuel.. check some vacuum hoses or maybe your intake

Nibras
07-30-2009, 12:47 PM
if you have a vacuum leak it will affect you fuel mixture thats why your smelling gas or unburn fuel.. check some vacuum hoses or maybe your intake



hmm well i checked and there are 3 vacum lines under my thorttle body and i used one to go into my intake and then plugged the other 3,

here is a pic , the red line you see going to the intake is the one i used for that , and right next to it is 2 other unkown vacum lines i plugged with screws ,

http://i7.photobucket.com/albums/y271/Nibras/2009-07-30144351.jpg

and then this pic is how i have my intake going from my head to the 3 divider to the intake and throttle body.

http://i7.photobucket.com/albums/y271/Nibras/2009-07-30144322.jpg


LMK thanks!

Iron_Zenki
08-27-2009, 10:30 AM
:wavey:hmm well i checked and there are 3 vacum lines under my thorttle body and i used one to go into my intake and then plugged the other 3,

here is a pic , the red line you see going to the intake is the one i used for that , and right next to it is 2 other unkown vacum lines i plugged with screws ,

http://i7.photobucket.com/albums/y271/Nibras/2009-07-30144351.jpg

and then this pic is how i have my intake going from my head to the 3 divider to the intake and throttle body.

http://i7.photobucket.com/albums/y271/Nibras/2009-07-30144322.jpg


LMK thanks!


Also check the wiring on the air temp sensor(two wires/grey) in its near the MAF

projectRDM
08-27-2009, 11:50 AM
:wavey:


Also check the wiring on the air temp sensor(two wires/grey) in its near the MAF

That wouldn't have any effect on the car running properly.