Jamaican 240SX

[The Architect]

This project started with just the SR20DET motor that was installed in another chassis, but spotted a good 240SX and new project was born.

Plans are to do the motor swap bigger injectors, Emanage ultimate and some tuning and see if we can break into the 10sec high range

previous chassis a KP61 Toyota Starlet
http://i18.photobucket.com/albums/b124/NissanKing/Project%20Starlet/IMG_0052.jpg

The new Chassis
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0085.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0086.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0089.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0090.jpg

Swap began
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0372.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0369.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0376.jpg

Also did some body work paint won't be done untill motor work is done
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0382.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0378.jpg

Turbo installed
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0063.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0065.jpg

smile
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0062.jpg

Piping should be complete this week so hopefully can get the motor running, then we can get around to installing the energy suspension bushing kit

give me your views

[s14unimog]

Is this going to be a drag only car? what was the tune system like before hand; on the Toyota?

BTW...What are the roads like around there?

[ixfxi]

me love the 2x4 hood prop.................. bigups


nice to see 240 love in jamaica, but good lord that rear hatch has a shitload of rust mon

[Black240Ct]

alot of cars in jamaca. i was suprised. saw a ton of sunnies

[driftn_silvia]

to the op...what type of distributor are you running? i see a coil wire to ignitor. b/c its not using a cas.

[turtle m3th]

Are you running a ka ecu?

[kouki-gymkhana]

Nice to see another yardie on here! Good luck with the swap! BTW, there are tons of tuned JDM cars in Jamaica eventhough the roads are shit.

[conrad_s13.5]

looks like its going somewhere now,....lol

good save

[The Architect]

to the op...what type of distributor are you running? i see a coil wire to ignitor. b/c its not using a cas.It was but changed to a distributor setup so we could use a tuned GTi-R ECU

I don't exactly know where the distributor came from but i think its from a N/A silvia modified to to use outside coil

[The Architect]

Is this going to be a drag only car? what was the tune system like before hand; on the Toyota?

BTW...What are the roads like around there?
No its going to be a street/Drag car well in the Toyota we had some issues of short wheel base and SR20 torque tendencies that didn't work the car hardly went in a straight line so boost never passed 10psi

[s13dan]

wow looks like its ganna be a beast. GL
And did you serously save that trunk!?If so nice work.

[turbo_dreams]

Bullet Bullet.

[drift_limo]

holly rust batman!!!!


keep us updated!

[The Architect]

wow looks like its ganna be a beast. GL
And did you serously save that trunk!?If so nice work.

Yep saved the trunk kinda hard to find a replacement for the hatch 240s in Jamaica

[projectRDM]

I respect the effort, but damn that looks like shit. No offense, I'm sure you have plans and I can't imagine the quality of cars there but I would have waited to post pics.

[ZEN14]

anymore pix of the starlet.... GL with s13 build

[gijoe69]

i want to see more KP61 pics with SR dub!!

[SochBAT]

They have roads in Jamaica?






mon?

[SidewaysNJ]

I'm surprised how clean the shock towers are.... but i got to say.. i HATE working under my car on tarmac in my driveway....have you found some soft rocks to lay on?

Jacking up the car on dirt/mud must suck too. I'm also surprised its LHD + ka powered. You think the car was brought over from states?

oh yeah chrome *bling* fender flares....

[The Architect]

I'm surprised how clean the shock towers are.... but i got to say.. i HATE working under my car on tarmac in my driveway....have you found some soft rocks to lay on?

Jacking up the car on dirt/mud must suck too. I'm also surprised its LHD + ka powered. You think the car was brought over from states?

oh yeah chrome *bling* fender flares....

The body is in great condition it just had a few bad spots which were taken car of, the trunk was paid special attention and i think it came out well.

After the motor is done and suspension then the paint and TLC will be done.

Yes it was imported from the states

[Johny5]

what the fuck is going on here?

[veeates36]

Wow.. Good job man. Anymore pics of the Jamaica roads..? Lol Keep us updated.

[ixfxi]

what the fuck is going on here?

jamaican buildup, you bomboclat

[turtle m3th]

^ROFL! You just made my day. I'll trade you some supligen for parts Architect!

[epics13]

big up to my caribbean ppl doing big things GL with build

[hOngsterr]

haha let me have the lip!

[mattro]

glwb. im hoping to get into the 10's as well

sr20de (yes de) with a t67.

[johngriff]

Idea for finished product?

http://img.photobucket.com/albums/v428/CelicaDRIFTER/BOSO%20S15/DSCN0621.jpg

[hOngsterr]

glwb. im hoping to get into the 10's as well

sr20de (yes de) with a t67.


lol if ur gunna put a t67 then that makes it SR20det

[BostonDriftah]

what the fuck is going on here?

jamaican buildup, you bomboclat

pussyhole cant you read. dis mon is getting durty and doing tigs right eh

BIG UP! !! Jamaica!
YouTube - DAMIAN MARLEY Welcome To Jam Rock (http://www.youtube.com/watch?v=G1IGsmSa2P4)

[FusionR240sx]

Is this going to be a drag only car? what was the tune system like before hand; on the Toyota?

BTW...What are the roads like around there?


the roads are nuts.
yo where in jamaica are you from?
i live in negril.

[The Architect]

the roads are nuts.
yo where in jamaica are you from?
i live in negril.

St. Catherine man

[OBEEWON]

<======= Dry foot tuff ed country bwoy. St. Mary/Mandeville.

First time I saw drifting in person was in JA...they almost hit me.

[FusionR240sx]

<======= Dry foot tuff ed country bwoy. St. Mary/Mandeville.

First time I saw drifting in person was in JA...they almost hit me.


LOLL.
i actually havn't seen it yet, but i'd be scared to see it out there.

[s13dan]

you know thats the exact car i thought this thread was about.
Idea for finished product?

http://img.photobucket.com/albums/v428/CelicaDRIFTER/BOSO%20S15/DSCN0621.jpg

[HyperTek]

what does that have to do with this? i suppose all you americans should go paint your cars in the american flag lol

OP thanks for sharing.

[silviaz]

No offence but the engine look very beaten. What the hell happened to the ignition, power steering system, wiring ?!? I mean....... it could have been much more simple if you had all the parts to do the job correctly.

[SR240DET]

No offence but the engine look very beaten. What the hell happened to the ignition, power steering system, wiring ?!? I mean....... it could have been much more simple if you had all the parts to do the job correctly.

Average annual income in Jamaica is roughly under 965,800 JMD or 11k USD. That may have something to do with it I'm sure.

[The Architect]

No offence but the engine look very beaten. What the hell happened to the ignition, power steering system, wiring ?!? I mean....... it could have been much more simple if you had all the parts to do the job correctly.

WTF we got everything for the car the power steering will be installed soon. not because the valve cover look beaten means the motor is not solid, infact it was just rebuilt just added the GTi-r pistons and rods for safe measure too, all wiring is complete just simply used the KA24 wire loom for ease of operation.

What is wrong with using a distributor setup? doesn't it make the power needed?
and we got all the direct ignition parts if we wanted to return it to the stock setup.

Obviously project is not complete yet but doing the motor first them worry about beauty

[ixfxi]

Average annual income in Jamaica is roughly under 965,800 JMD or 11k USD. That may have something to do with it I'm sure.

thank you mr economics....


you do realize that cost of living is different in each country, and that not every country is oversaturated with materialistic, money-driven fucks like here in the States, right?

no offense of course, i just figure if you're talking economics that i would add a bit to your demographic survey.

[kiriyama]

I respect the effort, but damn that looks like shit. No offense, I'm sure you have plans and I can't imagine the quality of cars there but I would have waited to post pics.

Whats the point of seeing the finished product of a project car? I want to see the shittiest of shitty pics, so when its done i can look back and see how much went into the build. But thats just me. Anyways, I was surprised to see how well the interior was maintained compared to the ext. GLWB

[The Architect]

Whats the point of seeing the finished product of a project car? I want to see the shittiest of shitty pics, so when its done i can look back and see how much went into the build. But thats just me. Anyways, I was surprised to see how well the interior was maintained compared to the ext. GLWB

Totally agree man, when we first saw this car it was just sitting under a tree without a care, so i saw potential and bringing it bk to life.

was surprised too about the interior too its pretty clean

[BostonDriftah]

Totally agree man, when we first saw this car it was just sitting under a tree without a care, so i saw potential and bringing it bk to life.

was surprised too about the interior too its pretty clean


YouTube - Jah Cure f/ Phyllisia - Call On Me (OFFICIAL VIDEO) (http://www.youtube.com/watch?v=hqWu_NuoiTU)
My buddy was from Montserrat , he fills me in on how tigs need to be dun.
LIke dude said on islands you gotta do what you gotta do. Im really impressed.

[2_slow_40]

+1 for jamaica mon. bringin back that hatch. cant wait to see the finished product.

[FusionR240sx]

any updates?

[The Architect]

Car Breath under its own power, will be updating with some photos tomorrow. Lots of little things to do

New double core Radiator and electric fan
bleed the Brake and clutch
install Aeromotive fuel pump, guages
General Cleaning of the interior and exterior

[S14_Kouki]

hell yeah are there any s chassis meets over there in jamaica whats the car scene like??

[kalypso123]

big up to my island massive!!

[!Zar!]

Car Breath under its own power
Sweet.

This thread makes me happy.

I subscribe to happy threads.

[s13tilldeath*]

Whats with all the sly remarks like mon and tings and shit. who gives a fuck about how much they make on avg. over in jamaica.

ANYWAYS cant wait to see updates....

[The Architect]

Ok pics as promised

sleeper
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0001.jpg

Smile
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0003.jpg

http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0004.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0007.jpg

little vid
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/th_MVI_0008.jpg (http://s18.photobucket.com/albums/b124/NissanKing/Project%20240SX/?action=view&current=MVI_0008.flv)

[!Zar!]

You trust that radiator hose?

[The Architect]

You trust that radiator hose?

Will be changed installing new Radiator tomorrow.

[S14_Kouki]

Will be changed installing new Radiator tomorrow.

Change theres no hose there lol

[The Architect]

LOL LOL will update with hoses in place

[WangonwWarrior]

yeah mon sr20 mon

[!Zar!]

I should go into all the threads by people from (insert region) and make say things that relate to their regional vernacular in attempts to be cool, funny and, hip.

[clark]

I should go into all the threads by people from (insert region) and make say things that relate to their regional vernacular in attempts to be cool, funny and, hip.

that would be stupid hella funny.

[BustedS13]

FILL WITH REEFER MON
DRIVE TO STATESIDE YA
we be jammin

[S14_Kouki]

I be jammin with some grape jam mon

[prodigyJJ]

Nice work fella. Yeah that radiator hose scared me when I saw it. It looks exactly like the hose on my vacuum.

How did the owner of that car before you manage to weather that hatch so bad, and the dash survive unscathed? Magic I tell you. Magic.

[!Zar!]

It looks like the car had a spoiler on the hatch.

I've seen them rust through like that on a California car.

[The Architect]

It looks like the car had a spoiler on the hatch.

I've seen them rust through like that on a California car.

Yea it did have a spoiler but was rust so removed we will be getting a new hatch from a friend

[irax]

keep up the good work man!

[vertedslider]

http://i396.photobucket.com/albums/pp41/vertedslider/092209110824.jpghttp://i396.photobucket.com/albums/pp41/vertedslider/092209111410.jpg

[ranger240]

thank you mr economics....


you do realize that cost of living is different in each country, and that not every country is oversaturated with materialistic, money-driven fucks like here in the States, right?

no offense of course, i just figure if you're talking economics that i would add a bit to your demographic survey.

no idiot, you're wrong. what he means is (get ready for it...) because income is comparatively low, parts are EXPENSIVE to IMPORT...

go wiki David Ricardo and then suck a fat one.. or a little one (they're more familiar to you anyhow)

[vertedslider]

when i was there i couldnt find the racing sene but i did see alot off hot ass whips i just wished i wasnt in a taxi so i could have followed but next time i wll find em keep doin what u doin bredgren


island style

[The Architect]

Small update

Gearbox leaked all the oil that was poured in
Herd a small sound in motor

So opened up the motor it spun the #4 Con rod bearing

Gearbox is leaking oil from the front seal

[The Architect]

Motor back together now

Installed fresh OEM 12111-1n501 Bearings over the weekend

awaiting the gearbox from my friend who freshened up things for me

should be up and running some time this week

[93nismo]

i thought the engine was rebuilt o.O

interesting thread... to say the least. kind of sad that everybody feel the need to say "mon". ohh well

[The Architect]

i thought the engine was rebuilt o.O

interesting thread... to say the least. kind of sad that everybody feel the need to say "mon". ohh well

Yea motor was rebuild with GTi-R pistons and new conrod bearings however recently we discovered the #4 conrod bearing had spun our observation of the oil pan showed it was bent and may have cause that bearing to go bad. so new Conrod bearings and new oil pan was installed.

[OBEEWON]

We need more pictures boss.

[hotlavaflow]

Nuff imports in JA. Gotta see more pics of this car I'm from Clarendon respec' bredda.

[ViciousCesar!]

haha let me have the lip!

damn it! you beat me to it. lol

[MavericStephenc]

no idiot, you're wrong. what he means is (get ready for it...) because income is comparatively low, parts are EXPENSIVE to IMPORT...

go wiki David Ricardo and then suck a fat one.. or a little one (they're more familiar to you anyhow)

Calm down there captain insaino
http://i100.photobucket.com/albums/m19/MavericStephenc/waterboy.jpg

calm down with the words and show some love for jam rock!

good luck with the build man

Edit:how bad it the rust as a whol on the car?

[The Architect]

At Maveric : rust was not bad just a few spots on the floor and the rear lid which was bad we getting a new trunk lid soon.


Ok guys everything is bk togeather Gearbox installed drove the car around a little not at high speed, just to feel through the gears. the gearbox feels a little tight but i guess with some miles it will be bk to its normal self.

pic of ebay (quality not that good was taken with my phone)

http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/Image004.jpg

http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/Image005.jpg

things to Do
* install Aeromotive fuel pump
* install power steering pump and plumb the system
* make a custom 3" downpipe

that should do it for this week

[FusionR240sx]

lookin' good.

[Shally2186]

front tires are goin the wrong direction...

lol just being stupid..

[The Architect]

Ok had some fun yesterday finally went into boost range this car feel amazing the rear tires had no use ha ha ha, motor felt strong at the 10psi, full boost by 3500-4000rpm and holds well all the way to 8000rpm

* After driving the car without Power steering we had decided it feels pretty good so no rush to install the power steering pump.

* Fuel pump to be installed and wires inside ebay and interior to be sorted on tuesday.

[RUTH'LESSDET]

nice build yardie
will this car see any Dover action in St Ann??:2f2f:

[The Architect]

nice build yardie
will this car see any Dover action in St Ann??:2f2f:

nawwww it will see the drag strip in clarendon when that venue is completed.

[timacks]

so baller

more pictures
action Photos and some jamaican hard parking please

[OBEEWON]

Eat sum yelluh yam and bully beef. Mek you trong suh you nuh need powa steering seen.

[The Architect]

Ok so where to start Car is now painted and looking much better


Early prep stages for paint

http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/Paintprocess.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/PaintProcess4.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/PaintProcess3.jpg

Got fuel denso supra fuel pump
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0078.jpg

the paint process

http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_00772.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_00782.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0079.jpg


New shoes

http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0080.jpg

how she is looking now

http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0082.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0081.jpg

will take some better pics after the buffing process, currently wearing 235/40 17" on the back

[93nismo]

lol i fogot about this thread, looks pretty damn good so far man:] looked like it has more filler then the 40's truck cab im doin at school tho. bondo bucket? maybe im just dumb.. haha looks nice tho:]

[SR_Vlurs]

cars looking nice man
keep it up

[BTP]

nice mon who did the paint for you,or did you do it yourself looks good.keep it up

i suggest maybe some better wheels tho with better offsets and what not those are a good start any suspension mods you need to slam this car mang.

[DALAZ_68]

omfg u restored the black line...legit! lol

good work sir

[sidedrifts13]

Looking good I would clean up that engine bay so it can look sexy

[JDM Sil4ty]

awww, why those wheels ? get baller wheels and show them how america gets down .. haha . have fun . keep us updated ..

[The Architect]

nice mon who did the paint for you,or did you do it yourself looks good.keep it up

i suggest maybe some better wheels tho with better offsets and what not those are a good start any suspension mods you need to slam this car mang.

Yea thinking about getting some M2 lowering springs

[Devens240]

this is amazing. props man. love the build

[johnksoy]

damn man you plan on rollling on 17s with stock suspension?

If I where you I'd sell the rims, get used coilovers and slam it on stock wheels if were on a low budget.

Don't get lowering springs on your stock suspension. IMO waste of money. Chances are your stock shocks already near death with lowering springs on stock shocks gonna kill them even more and ride like shit.

[FusionR240sx]

damn man you plan on rollling on 17s with stock suspension?

If I where you I'd sell the rims, get used coilovers and slam it on stock wheels if were on a low budget.

Don't get lowering springs on your stock suspension. IMO waste of money. Chances are your stock shocks already near death with lowering springs on stock shocks gonna kill them even more and ride like shit.


you clearly dont know what Jamaica's roads are like..
theres like 1 good road for the public and it's the "new" highway they made from montego bay to like idk where.

and they had to destroy ppl's homes to make it.

[johnksoy]

well im just saying NO on the noname lowering springs on stock shocks.

I believe he said it was gonna be a drag/street car. I just cant imagine 17s on stock shocks running 10s.

[The Architect]

Other than the lowering springs and energy suspension bushings the rest of the Suspension will remain stock no need for coilovers S13's handle pretty well stock when equipped with good rubber.

based on my research i have seen pretty stock suspension S13 on slicks doing 1.4 60ft times so in no rush to change stock suspension and the current shock are fairly new.

[surge s14]

will it do any sweet jumps?

[The Architect]

depends on what is sweet jumps???

[Zachsta]

http://i16.photobucket.com/albums/b3/rsouthan/napseg1.jpg

[johnksoy]

Other than the lowering springs and energy suspension bushings the rest of the Suspension will remain stock no need for coilovers S13's handle pretty well stock when equipped with good rubber.

based on my research i have seen pretty stock suspension S13 on slicks doing 1.4 60ft times so in no rush to change stock suspension and the current shock are fairly new.

shocks pretty new, you replaced them or something?

Well good luck on the 1.4 lol. Keep us updated, pretty interesting.

[The Architect]

account inactive cannot see the pic

[The Architect]

Oh where do i start to update this thread
so we hit the dyno few weeks bk and had boost problems eventually made 247whp and 193lbs of torque

here is a pic of one of those dyno runs
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/dynorun.jpg

Car was also running rather lean and this problem was traced to the fact that i had bored the MAF so currently running the original 50mm MAF housing
the reason for the lazy boost and not getting anyting higher than 10psi was a weak wastegate spring the solution was to utalize the dual port of the wastegate something like this was done
http://i18.photobucket.com/albums/b124/NissanKing/ewgsetup2.jpg

so received the LSD diff today its from a JDM S13 also got these babies too in preparation for a Drag meet coming up on the 28th of February

http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0068-1.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0069.jpg

Next step is to hit the dyno again and run 15psi of boost that should break the 300whp then see what she runs on the Drag strip

[The Architect]

Oh where do i start to update this thread
so we hit the dyno few weeks bk and had boost problems eventually made 247whp and 193lbs of torque

here is a pic of one of those dyno runs
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/dynorun.jpg

Car was also running rather lean and this problem was traced to the fact that i had bored the MAF so currently running the original 50mm MAF housing
the reason for the lazy boost and not getting anyting higher than 10psi was a weak wastegate spring the solution was to utalize the dual port of the wastegate something like this was done
http://i18.photobucket.com/albums/b124/NissanKing/ewgsetup2.jpg

so received the LSD diff today its from a JDM S13 also got these babies too in preparation for a Drag meet coming up on the 28th of February

http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0068-1.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0069.jpg

Next step is to hit the dyno again and run 15psi of boost that should break the 300whp then see what she runs on the Drag strip

[OBEEWON]

Where is the dyno you are using?

[fcken_engus]

^^same question^^

[ryangreg]

iiin jah-make-ya mon aka jamaica

[The Architect]

the Dyno is in kingston Jamaica

So it turns out the JDM diff i received is a skyline which is if i remembered correctly 4.3 of sweetness

today tried taking out the old open diff with no luck one of the front bolts is so rusted it broke so tomorrow have to try removing it.

[The Architect]

SUCCESS what a difference a lsd makes this car is amazing at 10psi this car feels rather quick i am now excited to see how she runs at 15psi and the slicks

12sec timeslip is the aim

[QuickSpoolSR]

[quote=The Architect;3155402]Ok so where to start Car is now painted and looking much better


http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_00782.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0079.jpg


Why didnt you remove the tailights? i would think that would almost be easier then taping them off

[michael_torres]

what did you paint it with looks good

[The Architect]

[quote=The Architect;3155402]Ok so where to start Car is now painted and looking much better


http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_00782.jpg
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0079.jpg


Why didnt you remove the tailights? i would think that would almost be easier then taping them off
quicker to not remove then, car was painted outside had to be able to move quickly in case of rain

[The Architect]

what did you paint it with looks good

honestly don't remember the colour just went to a local paint shop and got a single stage paint that matches the original paint

[shortyman4065]

wow man, it has come a long way. props to you

[TurboSE]

big props on the save...definitely not ideal working conditions...

[Sir Smokes A Lot]

^ agreed, probably a lot of specs of dust and dirt in the wet paint O=

[OBEEWON]

I heard good things about the 4.3. I bought one but got scammed so I never was able to try it.

[omgRWDgoodness!]

Glad to see I'm not the only one annoyed by people's ignorant use of vernacular. Anyway, I like what you've got going on. I feel inspired to get an SR by any means necessary now *hustles*

[The Architect]

have not been on here in a minute LOL

so took the car to the local drag strip on the west side of Jamaica had a not so good day but happy to finally get the car driven in anger

did a best of [email protected] however did a couple 14.3 @ 118mph the 60ft were some miserable 2.8

yep became aware the my uncle(owner of car) had used a stock pressure plate with the performance clutch so there is your culprit right there

have ordered a ACT complete heavy duty clutch kit so will be bk on the strip hunting the 11s once the 60ft come down we will be right there

http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0001-1.jpg (http://s18.photobucket.com/albums/b124/NissanKing/Project%20240SX/?action=view&current=IMG_0001-1.jpg)
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0002-1.jpg (http://s18.photobucket.com/albums/b124/NissanKing/Project%20240SX/?action=view&current=IMG_0002-1.jpg)
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0007-1.jpg (http://s18.photobucket.com/albums/b124/NissanKing/Project%20240SX/?action=view&current=IMG_0007-1.jpg)
http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/IMG_0009.jpg (http://s18.photobucket.com/albums/b124/NissanKing/Project%20240SX/?action=view&current=IMG_0009.jpg)

[OBEEWON]

Car looks very good. Love the pictures. Can we get more shots of the strip and some of the other cars? Never been to that strip.

[FusionR240sx]

do you know a guy by the name of Ranger?
that's what ppl call him.

[The Architect]

do you know a guy by the name of Ranger?
that's what ppl call him.

naw does he have another name?

[FusionR240sx]

naw, he just built one of those toyota taxi's tho.. had a 3sgte in it.
he calls me for parts all the time and we bring them down with us when we go there.
i'll try and get his "real" name loll

[The Architect]

So its been some time since i have done a update added a emanage blue to do some tuning the ignition harness is not connected and getting some weird reading from the tach in the emanage software. but here are the results

http://i18.photobucket.com/albums/b124/NissanKing/Project%20240SX/dyno.jpg

this was at 17psi and Q16 fuel the 2.5 exhaust was choking the car limiting the HP

heading to the track sunday hoping to hit the 12s