View Full Version : s13 180sx sr20 .. wont turn, no spark
gunmetalr32
07-27-2009, 10:18 AM
i have a 1996 s13 180sx with a black top... i bought it with a ripped/crushed inter fender ... i replaced it ... i tried to get it running, it cranks but wont turn over
* fuel pump primes/hums
*swapped igniters both work
*tried 2 red top ecus
*tried 1 black top ecu
*checked timing
there is no power going to the igniter
gunmetalr32
07-27-2009, 08:17 PM
i just tried a e6 black top ecu and nothing ... i also put in a new cas...
gunmetalr32
07-27-2009, 09:17 PM
any help will be appreciated
FRoSt415
07-29-2009, 04:01 PM
fuel pump work but is there fuel pressure? check by pinching the hose to the fuel pressure regulator while the ignition is on or after a few cranks. if it is hard to pinch there is pressure if its soft and easy to pinch no presure. Spark??? Wheres the spark at, have u check the plugs for spark? Ifyou removed the ignition coils and checked spark and there is spark check CAS and recheck timing. Remove CAS and position the crank to top dead center and follow manufatue specs for setting timing.
Also what is this inter fender and where is it located?
gunmetalr32
07-29-2009, 07:17 PM
fuel pump work but is there fuel pressure? check by pinching the hose to the fuel pressure regulator while the ignition is on or after a few cranks. if it is hard to pinch there is pressure if its soft and easy to pinch no presure. Spark??? Wheres the spark at, have u check the plugs for spark? Ifyou removed the ignition coils and checked spark and there is spark check CAS and recheck timing. Remove CAS and postion the crack to top dead center and follow manufatue specs for setting timing.
Also what is this inter fender and where is it located?https://www.everythingnissan.com/schematics/3/3795190.gifthis is what i replaced
its getting fuel
i took out the spark plug and its still not firing
fast-datsun
07-30-2009, 09:34 AM
Call me I will try to help....
[email protected] McKinney Motorsports 951-304-9300 or 1045
gunmetalr32
08-06-2009, 07:48 PM
still need some help
Sileighty_85
08-06-2009, 08:50 PM
have you check the ignitor chip?
gunmetalr32
08-06-2009, 09:06 PM
yeah and i used 2 perfectly good ones that worked on my coupe
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.