skylindrftr
07-23-2009, 01:16 AM
Lots of stuff I would like to get out of my garage here. All prices are OBO. Parts are sold as is, no returns, you get what you pay for so ask for as many pics as you want and ask as many questions as you want =)
http://i5.photobucket.com/albums/y159/jdm240/DSCN2910.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2911.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2912.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2913.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2914.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2139.jpg
(the rims in question are the rears)
First on the chopping block are my old pair of Southern Ways/Epsilon Mesh Wheels (just 2). I am guessing they were originally gold and were painted black by a previous owner because the paint is starting to chip around the center. They are black with chrome lips, one of the wheels needs the lip redone. They do come with tires which are Bridgestone RE750 (I paid 500 bucks for these originally). They are 16x7.5 with a +4 offset for good lip, the tires are 245 something R16, I don't remember the aspect ratio but you might be able to tell from the pics, if it matters that much ask me and I'll check. 4x114.3 PCD, and these will not clear your front brakes without a spacer, probably should be used for rears only, will clear rear brakes. The pic on my car of my old setup was with different tires, so it may sit slightly differently (Falken Ziex).
Also, these are 2 piece rims, one of the bolts is missing on a rim (Allen bolt), it flew off my car when I was going down the quarter mile at the now defunct LACR.
$350
http://i5.photobucket.com/albums/y159/jdm240/DSCN2932.jpg
Next is a hotside from a Nissan Pulsar GTiR T28 turbo. It has been treated and coated (don't remember what kind, it was 2 years ago). The cracks in it have been welded, but still need to be machined down. These are 200 bucks from Garrett new. These are bigger than the s14 t28 hot sides and make a good upgrade if you want to make more power, should support up to 320.
$50
http://i5.photobucket.com/albums/y159/jdm240/DSCN2933.jpg
1990 240sx drivers seat with misc molding, beat up yeah I know.
$5 take this junk from me please!
http://i5.photobucket.com/albums/y159/jdm240/DSCN2934.jpg
Infinit Q45 front rotors, used, drilled for 4 and 5 lug, I believe it is about time for them to be turned.
$40
http://i5.photobucket.com/albums/y159/jdm240/DSCN2930.jpg
S13 oem front brake lines, good no leaks. I might be able to provide hardware if necessary.
$15
http://i5.photobucket.com/albums/y159/jdm240/DSCN2931.jpg
All sorts of good stuff here.
Redtop SR intercooler pipe
$5
Redtop SR turbo lines (don't know which)
$5
s13 manual transmission mount
$10
S13 rear brake lines (good no leaks)
$10
T25 heat shield and bracket
$15
redtop sr20det exhaust manifold heat shield
$20
redtop sr20det oem thermostat (good and working)
$5
ka24de radiator cap
$5
http://i5.photobucket.com/albums/y159/jdm240/DSCN2937.jpg
Brand new kragen brand q45 front disks, I paid over 100 for these special order, not drilled for 4 lug.
$90
http://i5.photobucket.com/albums/y159/jdm240/DSCN2935.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2936.jpg
More stuff
HKS Brake pads for what says s13 front brakes, I don't have this particular setup, so I do not know if that is true, brand new in box. I got these from a d1gp from JSPEC.com Paid 60 bucks for them, very cool impossible to find now.
$40
Wipers 2 front, one rear, I think 2 are Bosch, okay condition
$5
ka24de automatic exhaust hanger (bots to trans mount on the auto transmission)
$5
3 rear strut caps, 2 fronts
$5
http://i5.photobucket.com/albums/y159/jdm240/DSCN2938.jpg
Bracket for a s13 hatch jack in the rear left quarter panel
$5
http://i5.photobucket.com/albums/y159/jdm240/DSCN2929.jpg
Sylvania head lamps (still works)
$10
Muteki lug nuts, no key though, you can pick them up at kragen or any auto parts store, this set only has 22 nuts, so enough for 4 lug only.
$15
http://i5.photobucket.com/albums/y159/jdm240/DSCN2928.jpg
s13 240sx front abs calipers, comes with retainers and good pads
$40
http://i5.photobucket.com/albums/y159/jdm240/DSCN2927.jpg
s13 non abs front rotors
$20
s13 non abs front calipers with all pads and retainers
$25
http://i5.photobucket.com/albums/y159/jdm240/DSCN2926.jpg
q45 front calipers with all retainers and good pads
$100
s13 rear hubs, not sure on bearing conditions lol
$35
http://i5.photobucket.com/albums/y159/jdm240/DSCN2925.jpg
s13 non abs master cylinder with resivor
$20
http://i5.photobucket.com/albums/y159/jdm240/DSCN2924.jpg
Nismo front s13 stainless steel lines, gives you a nice pedal feel, paid 180 new!
$90
http://i5.photobucket.com/albums/y159/jdm240/DSCN2923.jpg
s13 rear dust guards for rear brakes
$20
s13 front hubs
$40
http://i5.photobucket.com/albums/y159/jdm240/DSCN2922.jpg
s13 rear hatch trim
$15
s13 rear hatch cover supports (2)
$5
s13 e-brake cables
$25
http://i5.photobucket.com/albums/y159/jdm240/DSCN2919.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2918.jpg
Omori Water Temperature Gauge white face, Celsius, paid over 100, comes with sensor.
$90
http://i5.photobucket.com/albums/y159/jdm240/DSCN2907.jpg
GA16 sentra motor, just take it, needs a rebuild, comes with basically all parts. This was my first car project, I got it for 100 bucks and took it apart peice by peice in junior high school, good introduction to cars for someone who can not own one yet. Put it back together! I also have the repair manual for this motor, which is included.
$5
http://i5.photobucket.com/albums/y159/jdm240/DSCN2917.jpg
S14 rear uppper camber arms (RUCAS) by Ikeya Formula brand new in box, cost over 400 new!
$350
http://i5.photobucket.com/albums/y159/jdm240/DSCN2915.jpg
300zx brake booster z32
$35
Thanks for looking!
http://i5.photobucket.com/albums/y159/jdm240/DSCN2910.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2911.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2912.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2913.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2914.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2139.jpg
(the rims in question are the rears)
First on the chopping block are my old pair of Southern Ways/Epsilon Mesh Wheels (just 2). I am guessing they were originally gold and were painted black by a previous owner because the paint is starting to chip around the center. They are black with chrome lips, one of the wheels needs the lip redone. They do come with tires which are Bridgestone RE750 (I paid 500 bucks for these originally). They are 16x7.5 with a +4 offset for good lip, the tires are 245 something R16, I don't remember the aspect ratio but you might be able to tell from the pics, if it matters that much ask me and I'll check. 4x114.3 PCD, and these will not clear your front brakes without a spacer, probably should be used for rears only, will clear rear brakes. The pic on my car of my old setup was with different tires, so it may sit slightly differently (Falken Ziex).
Also, these are 2 piece rims, one of the bolts is missing on a rim (Allen bolt), it flew off my car when I was going down the quarter mile at the now defunct LACR.
$350
http://i5.photobucket.com/albums/y159/jdm240/DSCN2932.jpg
Next is a hotside from a Nissan Pulsar GTiR T28 turbo. It has been treated and coated (don't remember what kind, it was 2 years ago). The cracks in it have been welded, but still need to be machined down. These are 200 bucks from Garrett new. These are bigger than the s14 t28 hot sides and make a good upgrade if you want to make more power, should support up to 320.
$50
http://i5.photobucket.com/albums/y159/jdm240/DSCN2933.jpg
1990 240sx drivers seat with misc molding, beat up yeah I know.
$5 take this junk from me please!
http://i5.photobucket.com/albums/y159/jdm240/DSCN2934.jpg
Infinit Q45 front rotors, used, drilled for 4 and 5 lug, I believe it is about time for them to be turned.
$40
http://i5.photobucket.com/albums/y159/jdm240/DSCN2930.jpg
S13 oem front brake lines, good no leaks. I might be able to provide hardware if necessary.
$15
http://i5.photobucket.com/albums/y159/jdm240/DSCN2931.jpg
All sorts of good stuff here.
Redtop SR intercooler pipe
$5
Redtop SR turbo lines (don't know which)
$5
s13 manual transmission mount
$10
S13 rear brake lines (good no leaks)
$10
T25 heat shield and bracket
$15
redtop sr20det exhaust manifold heat shield
$20
redtop sr20det oem thermostat (good and working)
$5
ka24de radiator cap
$5
http://i5.photobucket.com/albums/y159/jdm240/DSCN2937.jpg
Brand new kragen brand q45 front disks, I paid over 100 for these special order, not drilled for 4 lug.
$90
http://i5.photobucket.com/albums/y159/jdm240/DSCN2935.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2936.jpg
More stuff
HKS Brake pads for what says s13 front brakes, I don't have this particular setup, so I do not know if that is true, brand new in box. I got these from a d1gp from JSPEC.com Paid 60 bucks for them, very cool impossible to find now.
$40
Wipers 2 front, one rear, I think 2 are Bosch, okay condition
$5
ka24de automatic exhaust hanger (bots to trans mount on the auto transmission)
$5
3 rear strut caps, 2 fronts
$5
http://i5.photobucket.com/albums/y159/jdm240/DSCN2938.jpg
Bracket for a s13 hatch jack in the rear left quarter panel
$5
http://i5.photobucket.com/albums/y159/jdm240/DSCN2929.jpg
Sylvania head lamps (still works)
$10
Muteki lug nuts, no key though, you can pick them up at kragen or any auto parts store, this set only has 22 nuts, so enough for 4 lug only.
$15
http://i5.photobucket.com/albums/y159/jdm240/DSCN2928.jpg
s13 240sx front abs calipers, comes with retainers and good pads
$40
http://i5.photobucket.com/albums/y159/jdm240/DSCN2927.jpg
s13 non abs front rotors
$20
s13 non abs front calipers with all pads and retainers
$25
http://i5.photobucket.com/albums/y159/jdm240/DSCN2926.jpg
q45 front calipers with all retainers and good pads
$100
s13 rear hubs, not sure on bearing conditions lol
$35
http://i5.photobucket.com/albums/y159/jdm240/DSCN2925.jpg
s13 non abs master cylinder with resivor
$20
http://i5.photobucket.com/albums/y159/jdm240/DSCN2924.jpg
Nismo front s13 stainless steel lines, gives you a nice pedal feel, paid 180 new!
$90
http://i5.photobucket.com/albums/y159/jdm240/DSCN2923.jpg
s13 rear dust guards for rear brakes
$20
s13 front hubs
$40
http://i5.photobucket.com/albums/y159/jdm240/DSCN2922.jpg
s13 rear hatch trim
$15
s13 rear hatch cover supports (2)
$5
s13 e-brake cables
$25
http://i5.photobucket.com/albums/y159/jdm240/DSCN2919.jpg
http://i5.photobucket.com/albums/y159/jdm240/DSCN2918.jpg
Omori Water Temperature Gauge white face, Celsius, paid over 100, comes with sensor.
$90
http://i5.photobucket.com/albums/y159/jdm240/DSCN2907.jpg
GA16 sentra motor, just take it, needs a rebuild, comes with basically all parts. This was my first car project, I got it for 100 bucks and took it apart peice by peice in junior high school, good introduction to cars for someone who can not own one yet. Put it back together! I also have the repair manual for this motor, which is included.
$5
http://i5.photobucket.com/albums/y159/jdm240/DSCN2917.jpg
S14 rear uppper camber arms (RUCAS) by Ikeya Formula brand new in box, cost over 400 new!
$350
http://i5.photobucket.com/albums/y159/jdm240/DSCN2915.jpg
300zx brake booster z32
$35
Thanks for looking!