View Full Version : Parting out 90' 240sx coupe
d0wN5h1Ft
04-12-2003, 11:40 AM
I have a 90' 240sx Coupe that I am currently parting out. Any and all parts are for sale.
-oem body panels(fenders, hood, front+rear bumper, and rear fender panel)
-oem seats, dash, steering wheel,(HUD) flip up lights, rear tail light set.
Again, ANY and ALL parts ( but the car complete) are for sale so state what you need and i'll get back at you with the part.
Bbandit
04-12-2003, 12:20 PM
will a 90 dashboard fit on my 91?
ƒVƒ‹ƒGƒCƒeƒB
04-12-2003, 12:29 PM
What kind of condition are your seats in? and do you have the hardware that holds down the battery?
d0wN5h1Ft
04-12-2003, 01:27 PM
to your question about those seats. The rear seats are in good condition, the passenger seat is good also. no major discolloration to the seat, no cuts or rips, but on the driver seat there are minor wear and tear's. On the driver seat there is a fringe on the left side and at the ASS of the seat. I can provide pics but need a few days to post if you would like?
d0wN5h1Ft
04-12-2003, 01:30 PM
To your question about the 89-90 dash kit fitting into a 91-94? i have no idea BUT i can ask my Michanic about this? state exacally what you want from the dash? gauge cluster, dash, and cener console?
Bbandit
04-12-2003, 04:02 PM
the dash only
i have a cracked dash so i want a replacement
does yours has cracks on it? is it a black dash?
how much are you willing to sell it?
will you ship it to tx?
let me know.. or PM me
Driftin_240sx
04-12-2003, 06:37 PM
was the car running??? if it was i could use a starter....
madison, wi 53704
david
91CRXsiR
04-12-2003, 07:38 PM
car have cruise control? where are you located?
what color is the fenders?
rear bumper cover?
d0wN5h1Ft
04-13-2003, 12:14 AM
the fenders and rar bumper are red, BUt i can sand them down. the are in good condition. the car does not have cruise control sorry. anything else you need
though? i am located in Monterey, California.
d0wN5h1Ft
04-13-2003, 12:20 AM
to your question about the dash. it is black, and no it does not have any cracks. i will let it go for 120. but shipping will be a problem. find out how much shipping wil cost from your place to Marina, California 93933?
d0wN5h1Ft
04-13-2003, 12:22 AM
to your question about the starter. YES the car was and still is runing. im just striping it to build up my own car. u knoe from the ground up. and yes the starter is in pretty good condition. message me back for more detail.
i need that triangle piece that covers the side mirror mount from the inside of the car. both left and right... how much is it?
kidinthehall
04-13-2003, 01:53 PM
how much/what condition for the piece that goes around the cig. lighter/ash tray, and center console cover. how much for he piece that goes below the tail lights (the piece that says 240sx on it)
Sil1580
04-13-2003, 02:51 PM
is your interior power? and do you have black power door panels?
email me w/details @
[email protected]
its_big45
04-13-2003, 08:33 PM
Do you have the hatch trunk cover/w all strings and clips to install? PM me if ya do w/price i can pick up in Monterey if u wish.
d0wN5h1Ft
04-14-2003, 12:00 PM
its_big45
To your question about the hatch trunk cover. Are you referring to a 240 hatch's trunk cover that also pops up when you open the trunk?
d0wN5h1Ft
04-14-2003, 12:02 PM
Sil1580
To your question about the interrior being power. It is manual locks and windows sorry. but if u wish i can try and find someone who has it?
does the car have a front lip? let me know. thanks!
[email protected]
kidinthehall
04-14-2003, 01:06 PM
any word on those interior pieces or that panel that goes below the tail lights? $$?
its_big45
04-14-2003, 02:59 PM
Downshift,
Yes thats the part, i need the whole assembly to cover the trunk, if you have then ill buy and can pickup.
Also interested in the passenger side fender. If you can sell it cheaper than pick-n-pull price then ill get that too.
d0wN5h1Ft
04-14-2003, 07:43 PM
iggy:
naw the car does not have a front lip. i think it was just the base model not the SE, or LE
d0wN5h1Ft
04-14-2003, 07:53 PM
its_big45:
naw man. sorry. I have hte base model 240 COUPE. not the fastback. but I am selling hte front end (bumper,r/l fender, and hood) for 270.00. I am not framiliar with pick and pulls price for each fener. I knoe that they go for 220.00 for the set brand new, and used i seen them for 175.00 as a set but i'll sell the right fender to you for 70.00.
d0wN5h1Ft
04-14-2003, 07:58 PM
kidinthehall:
I'll sell you that cener console kit, and rear 240sx garnish for 100.00
s13cruzer
04-15-2003, 06:42 AM
how much you want for the driver side fender?shipped of course cz i live in mass.
thanks
d0wN5h1Ft
04-15-2003, 11:30 AM
s13cruzer:
i'll sell the right fender to you for 70.00. i think it weighs in between 10 and 20 pounds. right? and shipping i'll find out from Marina. CA 93933 to your address.? so i'll need your address to find out total.?
carkid0007
04-15-2003, 12:25 PM
How about the exhaust is it in good condition and do you have one ? if so how much ?
Wei240
04-15-2003, 02:42 PM
are you also selling the doors, i need passenger door only, is it in good condition and how much?
and i'm assuming coupe/hatch doors are the same, does anyone know?
lastly is the color red red or that maroon dark red?
Thx
SAVAGE1
04-15-2003, 04:14 PM
I'll take the fenders if they are the bright red (not burgandy) and in good shape. I can pick them up, I'm in the Bay Area. Let me know ASAP. Thanks
s13cruzer
04-15-2003, 04:56 PM
looks like fenders are a hot item , if he is picking them up , then count me out cz i will need a bit to scrounge up the extra cash , sorry
d0wN5h1Ft
04-15-2003, 06:51 PM
NEW POST: I abandoned my lights. new parts to be listed. ALL of these parts come from a 90 240sx coupe.
-right and left bumper turn signal. 10.00
-right and left (HUD) head lamps. 15.00
-cigarertte tray, compartment, radio unit cover,( CENTER CONSOLE) 35.00
-passanger seat. 30.00
-rear seat set. 30.00
-oem s13 240sx spedometer. 60.00
-dash. 100.00
-rear s13 windown brake light. 20.00
-s13 trunk door w/o lock. 40.00
-oem 240sx front bumper. 60.00
-front bumper absorber. 40.00
-front bumper reinforcment. 30.00
-oem 240sx hood (good condition). 60.00
-right/ left side mirrors. 40.00
-right/ left side skirts oem. 50.00
-rear bumper absorber.20.00
-oem a/c condensor. 50.00
-left and right head lamp covers. 20.00
-right/ left door( good condition) 100.00
-right/ left front fenders(good condition). 100.00
-COMPLETE s13 240sx front end. 220.00
-s13 240sx tail light set w/ lower garnish that says 240sx. 120.00
-oem 240sx intake box with piping. 50.00
-s13 240sx fender corner lights. 15.00
-240sx 4/lug oem donut set of 4 ( not bent, and still wraped)
100.00
-other parts not listed but if you want a request, contact me at 831-384-6181, name is brandon
gschroeder78
04-17-2003, 12:44 AM
I need the Third brake light if you still have it. I could also use the headliner if it's available, grey and in good condition.
Garrett
1atsx
04-17-2003, 10:08 AM
has the dash already been taken? if not i'll take it
d0wN5h1Ft
04-17-2003, 10:28 AM
ani questons on parts IM me on: d0wn5h1ft , that is my aim screen name.
Driftin_240sx
04-18-2003, 05:56 PM
hey i got a list for you can u please let me know how much u want for this stuff....
starter
emergency flasher button
the cable that goes from the gas door to the trunk,gas door
rear side markers
the plastic cover next to the cig. lighter
the pocket under the radio
let me know how much u want for that stuff..
this is all to madison, wi 53704..
i can payal the stuff wenever
thanx
david
240Driver39
04-19-2003, 12:00 AM
lookin for a rearview mirror, got one? if please let me know, with a price
thanks
toddnappi
04-21-2003, 08:01 AM
Hi,
I need all 4 of your brake calipers, along with this line in the engine: http://mywebpages.comcast.net/toddnappi/240/10-22/DSC00021a.jpg. It is the line that runs right by the exhaust manifold. On one end is a oval connection with three holes on the inside, and the other end goes into a hose. It is a metal line and in the middle is a screw on valve. I think it is AC or coolant. Thanks and let me know, Todd
Warwick5s
04-21-2003, 10:52 AM
how much would you want for your timing control unit (the white box next to the fuse panel and underneath the kick panel)
s13 Monster
04-22-2003, 01:27 AM
Is it a digital gage cluster?
rps13_180sx
04-22-2003, 08:57 AM
I need the driver side inner fender panel ( the panel that goes from the fire wall to the front of the car and holds the strut and goes down to the frame. Are u sellin that and what kind of condition is it in.
d0wN5h1Ft
04-22-2003, 10:24 AM
s13 Monster.
this is the american base model. thses do not come with digital gauge cluster. sorry
s13 Monster
04-22-2003, 05:24 PM
Iam kinda confused, because mine is a 91 240 sx Us version and it requires a digital cluster.
toddnappi
04-22-2003, 05:58 PM
Originally posted by toddnappi
Hi,
I need all 4 of your brake calipers, along with this line in the engine: http://mywebpages.comcast.net/toddnappi/240/10-22/DSC00021a.jpg. It is the line that runs right by the exhaust manifold. On one end is a oval connection with three holes on the inside, and the other end goes into a hose. It is a metal line and in the middle is a screw on valve. I think it is AC or coolant. Thanks and let me know, Todd
hey, you got any of these parts?
d0wN5h1Ft
04-22-2003, 07:27 PM
s13 Monster- i dunno man, because i seen the jdm s13 models carary the digital gauge cluster, like in the s13 front clip for instance. but naw mine is the original " non digital gauge cluster" sorry
white_89
04-22-2003, 08:57 PM
still have the driver's side front fender available and if so for how much
s13 Monster
04-22-2003, 10:06 PM
thats cool, Thanks anyways though.
d0wN5h1Ft
04-22-2003, 10:16 PM
s13 Monster- yeh it's khoo dogg. any other parts you interested in? anything but fenders, headlight covers, and hood. because somewun just locally picked them up. So if ya need anithng just let me knoe. peace
d0wN5h1Ft
04-22-2003, 10:23 PM
toddnappi - hey man, i'll have to get back to you on those parts man. private message me iight peace
d0wN5h1Ft
04-22-2003, 10:25 PM
white_89- wadup man, naw i sold both feners, headlight covers and hood alrady sorry man, anything you interested in though, name it and i'll try my best to supply it! peace
d0wN5h1Ft
04-22-2003, 10:27 PM
rps13_180sx- I'm not to framilliar with this part, let me check it out and get back to you, actually , private message me ok.!
d0wN5h1Ft
04-22-2003, 10:29 PM
1atsx- yeh man, the dash is still available, but shipping is a bitch, i have pay pal if thats the route you want to go? private message me about this iight . peace
rps13_180sx
04-23-2003, 09:02 AM
need the driver side inner fender panel ( the panel that goes from the fire wall to the front of the car and holds the strut and goes down to the frame. Are u sellin that and what kind of condition is it in.:)
Yoshi
04-23-2003, 10:38 AM
still got your rear view mirror?
richardxfeng
04-28-2003, 04:17 PM
did you sell the rear bumper cover?if you didnt how much you selling it?
d0wN5h1Ft
04-28-2003, 10:06 PM
richardxfeng:
yes is still have the rear bumper cover, 60 is what i am asking but i can go down to 50. good condition also.
Yoshi:yes i still got the rear view mirror, and i recieved ur payment for the item in paypal, but not payment for shipping, do u still want it? if so let me get it weighed for estimated cost.
richardxfeng
04-28-2003, 10:13 PM
are you in LA area?if not,how much is the shipping of cover?
d0wN5h1Ft
04-29-2003, 01:16 AM
i am about a 6 hour drive from LA going torwards san fransisco ( north) shippin gi can find out for you and get back to you with it. PM me for more info plz.
richardxfeng
04-29-2003, 09:04 PM
did you get my PM?
d0wN5h1Ft
04-29-2003, 11:42 PM
yeh i got ur pm. richardxfeng, i went to the post office to get it weighed and there were hella people there so they told me to come back later, when i went back it was closed to then i went home,i am goin back tomarrow to get it for shure so ill have you the shipping cost tomarrow arround 12.00pm
d0wN5h1Ft
05-02-2003, 12:35 PM
parts still for sale!
morexviit
05-02-2003, 12:52 PM
do you still have the trunk lid?
d0wN5h1Ft
05-02-2003, 01:55 PM
are you talking about the fastback trunk lid that also comes up and attatches to the trunk door when you open it? or the trunk door on the COUPE??
morexviit
05-02-2003, 04:28 PM
the actual trunk on the coupe
d0wN5h1Ft
05-02-2003, 04:39 PM
OH, lol yeh i have that. actually the trunk is new. I had bought it a few months ago to replace the old one (the old one had got dammaged) so yeh, will you be picking it up or do you want it shipped, by the way im asking 50+ shipping.
d0wN5h1Ft
05-06-2003, 12:05 PM
PARTS STILL FOR SALE!! ANY AND ALL!!
apexL8
05-06-2003, 12:25 PM
was it the 89's or the 90's that had the pistons that when put in a DOHC resulted in like a 14.1.1 comp ratio??
or do you not feel like taking the engine apart?
d0wN5h1Ft
05-06-2003, 01:07 PM
haha man, i h ave no idea about ka24E pistons in the DE dual cam. is that what you wanted? just the pistons?
fogleroller
05-06-2003, 01:30 PM
Originally posted by apexL8
was it the 89's or the 90's that had the pistons that when put in a DOHC resulted in like a 14.1.1 comp ratio??
or do you not feel like taking the engine apart?
early 89's there is a cut off date. It's on Fresh Alloy somewhere. You an tell by the engine #
apexL8
05-06-2003, 09:39 PM
i thought it was 89 fogle......thanks for the clarification
nevermind......i don't want the pistons anymore
d0wN5h1Ft
05-22-2003, 12:20 PM
bump
d0wN5h1Ft
06-06-2003, 02:23 PM
BUMP
spec-d
06-09-2003, 12:35 AM
I'm looking for the driver side headlight assmebly.
If you still have it, let me know and how
much?
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.