Is it safe to gain more camber like this??

[Bullet01]

Just curious but if you take out the inner 2 bolts to gain more camber, will it compromise the safety of the mount?
http://i51.photobucket.com/albums/f392/bullet01/hkscamberplate.png

[jayrawr]

i would think it's not so smart to take off the 2 screws that hold the bottom part of the coil over to the upper mount off in order to gain more camber... it'd probaby put more stress on the 2 remaining SMALL bolts and cause them to snap...

[Fries]

Why not remove that bolt and toss it back one place.

I wouldn't do more than that.

[Bullet01]

Thats just a sample picture. Mine have the bolts side by side already.

[GhettoIced-t]

On some coilovers the plates have another set of holes further back, so you can get that sick camber up front...

you can always drill and tap new holes depending on how much room you have between the plate and top of the shock.