FS: Slightly Used Garrett GT3076R .82 a/r Tial V-Band Exhaust Housing

[SpdElemts]

I have a slightly used Garrett GT3076R Dual ball bearing turbo for sale. Turbo was only used on the dyno until tuner realized that the headgasket was leaking boost pressure. Turbo was removed right after and has less then 100 miles on it. Turbo has no shaft play, felt the same way as it did when it came brand new in box.

Turbo Specs are:
-Garrett Dual Ball Bearing Turbo
-GT3076R (aka GT30R aka GT3037)
-Tial .82 a/r exhaust housing with v-band inlet and v-band exhaust outlet
-T04E style compressor housing with 4.00 inlet and 2.00" outlet. Compressor inlet has a machined ported shroud (anti-surge).

Very Good response turbo for 4 Cyl applications. This turbo has a flow capacity of about over 500HP.


Turbine
-Wheel: 60mm w/ 84 trim
-Housing: .82 a/r

Compressor
-Wheel: 76.2mm w/ 56 trim
-Housing: .60 a/r

Im looking to get $1100 plus shipping and paypal fees

Turbo does not include fitting shown in pictures.

Turbo was stored with tape sealing all open ports on turbo. Tape was taken off only for pictures.

Thanks for your time!


http://i174.photobucket.com/albums/w106/spdelemts/Garrett%20GT30R/DSCN1258.jpg
http://i174.photobucket.com/albums/w106/spdelemts/Garrett%20GT30R/DSCN1274.jpg
http://i174.photobucket.com/albums/w106/spdelemts/Garrett%20GT30R/DSCN1273.jpg

Fins are absolutely free from chips. (Black paint is fading may look like chips)

http://i174.photobucket.com/albums/w106/spdelemts/Garrett%20GT30R/DSCN1276.jpg

Dont mind the SUPER Sharpie...made the turbo look a little dinky in pictures haha

http://i174.photobucket.com/albums/w106/spdelemts/Garrett%20GT30R/DSCN1265.jpg
http://i174.photobucket.com/albums/w106/spdelemts/Garrett%20GT30R/DSCN1259.jpg
http://i174.photobucket.com/albums/w106/spdelemts/Garrett%20GT30R/DSCN1244.jpg
http://i174.photobucket.com/albums/w106/spdelemts/Garrett%20GT30R/DSCN1248.jpg
http://i174.photobucket.com/albums/w106/spdelemts/Garrett%20GT30R/DSCN1261.jpg
http://i174.photobucket.com/albums/w106/spdelemts/Garrett%20GT30R/DSCN1263.jpg

A look into the compressor outlet. Clean.

http://i174.photobucket.com/albums/w106/spdelemts/Garrett%20GT30R/DSCN1270.jpg

[khmerguy618]

MAN, if i had a vband flange... well not really lol.

awesome condition, seen it in person.

[SpdElemts]

Bump...BUMP

[SpdElemts]

Bump...Turbo is perfect for the Synapse Turbo Top Mount SR20DET Tial V band Exhaust Manifold (http://www.synapseturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=SM&Product_Code=syn-syn-man-02&Category_Code=manifoldnissan).

[Geno750]

Do they sell downpipes for that manifold? I'm in an area where it is hard to get things tigged up.

[khmerguy618]

Do they sell downpipes for that manifold? I'm in an area where it is hard to get things tigged up.

I think the DP goes to the turbo. Atp sells vband flanges w/ 90deg bend already on it so u can just mig a dp together or measure it out have it tigged somewhere.

3" V-Band Downpipe - Low Profile 90 Degree w/Flex: atpturbo.com (http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-MDP-010&Category_Code=BCS)

V-Band and 3" Machined Flange and clamp Set: atpturbo.com (http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-FLS-041&Category_Code=FLG)