Front turn signal wiring

[N1ceDrgn]

Can anyone pass on what the correct connections are for the front turn signals. While the connector is plugged in, for each side, while facing the car, what is the color sequence for each side? i.e. Red, Black, White and White, Black, Red... Anyone?

[mrmephistopheles]

More problems, B?

[N1ceDrgn]

After some more wiring, the damage the thieves made is starting to show up now. I believe I have the turn signals connected the right way but when I use the turn signals, dr side front flashed 2x's as fast as the passenger fr, and rear signals do. I wanted to check and make sure the wiring was correct. The relay works as it should or so it seems. So the only other thing left is how the wiring is connected to the lights for the signals. You have an FSM and or some info?

[mrmephistopheles]

it's at my apt... too bad I'm in NC and can't get to it. See if there's anyone handy to let you peek at their wiring.

[240meowth]

sometimes if you use a smaller bulb, or bigger bulb, or smaller gauge wire or bigger gauge wire, it'll cause the turn signal to blink much faster/slower. that's all i can give you

[rancid240]

or the bulb is going out/loose. take the working sides bulbs and switch and see.

[N1ceDrgn]

The bulbs seemed alright, that's why I am down to the wiring. When I wired it in, I matched what the order was off the car it was taken from. Silly me, I thought it would match up..