240sxrb25
06-18-2009, 11:21 PM
i have an rb25det s2, aem universal fuel ignition controller, and boomslang harness. i installed the program and hooked it up. the engine fired up on cylinders 2, 5, and 6. after some testing, i found that the coil packs werent getting a signal. the injectors were all firing.
when i start it off the stock ecu alone, it runs on all six, but its just rich because of new injectors.
i pulled the fuel rail, and plugs to test for fuel and spark and had good results on stock ecu. now i put it back together with the fic and harness and i now have no spark and the injectors are not firing. i reinstalled the program, reflashed, and nothing. all fuses seem to be good.
has anyone had experience with this and what are some ideas? its been too long, i just want to get it on the road!
thanks
when i start it off the stock ecu alone, it runs on all six, but its just rich because of new injectors.
i pulled the fuel rail, and plugs to test for fuel and spark and had good results on stock ecu. now i put it back together with the fic and harness and i now have no spark and the injectors are not firing. i reinstalled the program, reflashed, and nothing. all fuses seem to be good.
has anyone had experience with this and what are some ideas? its been too long, i just want to get it on the road!
thanks