Turbo water/oil lines...

[drkidd22]

So my car has an oil leak from one of my turbo lines that's broken. I was wondering if anyone knows what kit should I get. I'm thinking that while I'm at it why not replace all the lines. Let me know thatnks.

[HYPNOTIK]

I have this kit (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=380126326579&viewitem=&sspagename=STRK%3AMEWNX%3AIT). Fitment was good except for the bolt for the oil feed line was too long, I had to grind it down.

[drkidd22]

FRsport.com has two oil lines. One is from circuit sports and the other one is from Earls. The only difference is that the Earls line has an oil restricter. Is this necessary. The price difference is about $40.

FRSport Lines (http://www.frsport.com/index.php?target=products&mode=search&subcats=Y&type=extended&avail=Y&pshort=Y&pfull=N&pname=Y&match=all&cid=0&q=turbo+lines)

I also saw this kit on ebay.com

http://cgi.ebay.com/ebaymotors/TURBO-OIL-RETURN-DRAIN-+-FEED-LINE-NISSAN-240SX-S13-S14_W0QQitemZ110378548211QQcmdZViewItem

[clark]

if you have a stock t25 the restrictor is embedded in to the banjo bolt that goes into the block.

get the FRsport lines and stop being a pussy. ISIS also makes a set now, check out 240sxmotoring and i think enjuku carries them.

[drkidd22]

if you have a stock t25 the restrictor is embedded in to the banjo bolt that goes into the block.

get the FRsport lines and stop being a pussy. ISIS also makes a set now, check out 240sxmotoring and i think enjuku carries them.


The only welded pussy here is you with a dick going in the ass and my cum all over your mouth. If I ask is because I'm trying to save money here and if you know all fittings I need and all the sizes I'll rather buy them and build the lines my self. So let me know...thanks.

[piranhamatt]

^...

:mepoke:

You okay? Just calm down...

[drkidd22]

Yeah I'm aight, just that I'm trying to ask a few questions here to which I obiously don't know the answer to and some people just because they know the answer they asume everyone else should know it too. So anyone knows what size fittings and angles I should look into, if I can't build it I'll just get the ISIS kit from enjuku.

^...

:mepoke:

You okay? Just calm down...