opponheimer
05-29-2009, 05:04 PM
kit includes
lovefab turbo manifold - $1800
aem ems - tuned on 740cc injectors - $1900
aem iat, gm map sensor $100
gt3582r turbo (0.64 ar, instant spool) $1400
60mm wastegate and dump tube $300
downpipe - $200
oil feed and coolant lines for turbo - $150
manual boost controller - $25
5 hours of tuning, 11.3afr at full throttle - $400
Tune on 22psig is around 480hp 390ft-lb tq
My car with this setup gets squirrely in 3rd with 12" wide rear wheels with 275-40R17's
Car is very reliable, I daily drive it nearly every day. Very conservative tune as well
Cost for everything listed above:
$5000
Price does not include shipping or paypal fee
This is an extremely good deal for a beyond exceptional setup. The turbo's potential is in the low 600's. Prices indicated by parts are what I actually paid, plus months of waiting on AEM and the lovefab manifold.
What you will need to get your RB running on this setup:
-install sidefeed 740cc injectors (not included)
-tap charge pipe for 3/4" npt for IAT sensor
-run vacuum line to map sensor
http://rb25det.741.com/mini-P1000239.JPG
http://rb25det.741.com/mini-P1000496.JPG
lovefab turbo manifold - $1800
aem ems - tuned on 740cc injectors - $1900
aem iat, gm map sensor $100
gt3582r turbo (0.64 ar, instant spool) $1400
60mm wastegate and dump tube $300
downpipe - $200
oil feed and coolant lines for turbo - $150
manual boost controller - $25
5 hours of tuning, 11.3afr at full throttle - $400
Tune on 22psig is around 480hp 390ft-lb tq
My car with this setup gets squirrely in 3rd with 12" wide rear wheels with 275-40R17's
Car is very reliable, I daily drive it nearly every day. Very conservative tune as well
Cost for everything listed above:
$5000
Price does not include shipping or paypal fee
This is an extremely good deal for a beyond exceptional setup. The turbo's potential is in the low 600's. Prices indicated by parts are what I actually paid, plus months of waiting on AEM and the lovefab manifold.
What you will need to get your RB running on this setup:
-install sidefeed 740cc injectors (not included)
-tap charge pipe for 3/4" npt for IAT sensor
-run vacuum line to map sensor
http://rb25det.741.com/mini-P1000239.JPG
http://rb25det.741.com/mini-P1000496.JPG