View Full Version : SR timing question
KoukiMonsta
05-28-2009, 11:04 PM
can someone point me to a good how to on sr timing? i searched and couldnt find it, or eplain please. also what would i want my timing to be set at with colder plugs, 850cc, enthalpy, gt25, nismo fpr, walbro 255? thanks.
airhead
05-28-2009, 11:35 PM
buy a timing light
12mm socket
warm up the car a bit
turn off ac, radio ect.
disconnect TPS its the sensor right underneath the throtle you cant miss it
rev the car three times at 3k this locks it up.
now connect timing light
to make adjustment loosen the 12mm bolts on the CAS just LOOSEN
and adjust from there
and its 20 degrees from the last mark
every mark is 5 deegres
KoukiMonsta
05-29-2009, 12:21 PM
buy a timing light
12mm socket
warm up the car a bit
turn off ac, radio ect.
disconnect TPS its the sensor right underneath the throtle you cant miss it
rev the car three times at 3k this locks it up.
now connect timing light
to make adjustment loosen the 12mm bolts on the CAS just LOOSEN
and adjust from there
and its 20 degrees from the last mark
every mark is 5 deegres
last mark? on which end? and would that be 20*BTDC?
thanks
clark
05-29-2009, 02:35 PM
SR20 Setup Tips (http://www.plmsdevelopments.com/sr_setup_tips.shtml)
he mentions to use the loop on the coilpack harness, but i tried it and don't get an accurate reading.
use a spark plug wire and plug it into cyl#1 spark plug and connect the coilpack to the other end of the spark plug wire, then conenct the timing light pickup to the saprk plug wire.
but yeah the dude that said disconnect the TPS is right, i'm just including the details he didn't include.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.