Help with radiator shroud for fan

[MeanS14]

I have decided I need to build a shroud around my fan on my radiator to keep my car cool enough in this summer heat

The problem is.....

1. There is VERY little room for anything
2. I have never done something like this before so I dont know how to make an efficient shroud
3. I dont have a welder or material

**The fan has to be removable from the shroud or the shroud removable from the radiator because I have to put the radiator in first then mount the fan to it because of the lack of room

I will probably end up taking it to get done at a shop here in AZ

The main thing I would like is some imput from people on here as to how I would go about making this work with the limited space, and maybe some ideas from people who have build shrouds before

http://i129.photobucket.com/albums/p218/silviasr20driftkingalex/Radiator002.jpg
http://i129.photobucket.com/albums/p218/silviasr20driftkingalex/Radiator001.jpg

http://az240sx.org/forums/style_images/1/img-resized.png Reduced: 80% of original size [ 800 x 600 ] - Click to view full image
http://i129.photobucket.com/albums/p218/silviasr20driftkingalex/radiator003.jpg

http://az240sx.org/forums/style_images/1/img-resized.png Reduced: 80% of original size [ 800 x 600 ] - Click to view full image
http://i129.photobucket.com/albums/p218/silviasr20driftkingalex/radiator004.jpg

[slider2828]

That is weird how your fan is so close to the motor. Mishimoto has dual fans with shroud on it. Look at Phase2 site.

[MeanS14]

Its because I got a thick ass radiator from Ron Davis. Its a 26x16 dual core dual pass and I moved it back to where the a/c condensor is supposed to be to give me more room but its still a tight fit

[Bigsyke]

stupid question, but how did you mount the radiator back to where the A/C condenser was?

[MeanS14]

Just made a panel to sit under the radiator and made custom brackets

[Forge_55b]

why don't you add some ducting to route air to the rad?