bubzb20z
05-21-2009, 10:28 AM
So I bought somebody elses basket case.
Heres where I am stuck at:
Code 11 CAS . Wiring was all hacked up, no pulse.
Replaced CAS and rewired. Got injectors working
Still have 11. Car pops, backfires-has been timed
#3 and #4 are fouled with carbon #1 gas # 2 dry
CAS' discs are both differently set. The different sized holes on the discs are 90 degrees off. It starts a little easier with the original CAS.
Compression 150-160 all across,
Any ideas, I was going to set the disc anothe 90 off after driving the pin out of the shaft, and cams are lined up right, chain is tight
Thanks
Heres where I am stuck at:
Code 11 CAS . Wiring was all hacked up, no pulse.
Replaced CAS and rewired. Got injectors working
Still have 11. Car pops, backfires-has been timed
#3 and #4 are fouled with carbon #1 gas # 2 dry
CAS' discs are both differently set. The different sized holes on the discs are 90 degrees off. It starts a little easier with the original CAS.
Compression 150-160 all across,
Any ideas, I was going to set the disc anothe 90 off after driving the pin out of the shaft, and cams are lined up right, chain is tight
Thanks