Ka24de wont fire! Plz help

[kissritz]

So ive been reading tons of threads and replaced a shit load of things, and still doing the same thing. its turning over but not firing, ived changed the spark plugs, distributor, ran a compression test, maf sensor, tps sensor, fuel pump,fuel filter, fuel pump fuse, checked gounds and harness, tried removing the temp sensor to see if it would fire, used starting fluid... still Nothing!! any suggestions? im going to change the Ecu and Coil tommorow, see what it does. Thanks

[[email protected]]

lol if your car is 5 speed, i can be as stupid as the clutch sensor thing. i dont know the exact name but you know what i mean

[kissritz]

naw its not it, i replace that a while back. And also it wouldnt turn over if that was the case.

[240sxrunna]

i had the same problem when i got my 240 last year i compleatly rebuilt the motor and replaced everything under the hood and when i whent to start it it just turned over. i wasnt to concerned cause i new the only thing i had left was the ecu. i whent to the junkyard pulled one out for 25 bucks put it in and fired right up no problems since

[gunmetalr32]

did you check the timing ... since you changed the distributor

[kissritz]

yeah we moved the dissy while we tried to start it. I also lined up the dissy and had the 1rst cylinder on top. Is that correct?? haven't changed ecu yet but for sure will. thanks guys

[kissritz]

changed Ecu and Coil. still not firing.

[240sxspeed]

ignitor chip next to coil pack on driver side strut tower fixed and your welcome haha

[jonnybonds84]

Have you check if your getting spark, fuel????? Check the fuel lines to see if there is any pressure when you turn it on the on position. Double check your timing too. Oh yeah make sure your not flooding your spark plugs too.