FS: S13 Radiator with dual electric fans plug and play

[UNISA JECS]

Just what the title says this is a 100% bolt on plug and play S13 radiator with dual electric fans everything is in good working condition.

$140 picked up

http://i167.photobucket.com/albums/u159/zilvia_album/P1160029.jpg

[Felipe]

how much for just the fans?

[Twincamlove]

are those altima fans?

[S13Silvia917]

is it just a stock ka radiator??

[spiderlone]

you said "plug and play " in to a S13 ?.. impossible .
but glws

[UNISA JECS]

you said "plug and play " in to a S13 ?.. impossible .
but glws

Yes its plug and play or i'll give you it for free, it came off my own S13.

Look closely at the plug on the far right with the black and blue wire this plugs into were the stock condensor fan used to connect, you can eliminate the condensor fan and you will be fine, these will turn on automatically when teh water temp reaches I forget the extact temp and when the AC is turned on but I used them for a little over 2 years with no problems with my KA24DET.

[UNISA JECS]

I could school you all on what I did if you wanna build a similar setup but i'll sell this first.

P.S. If you search hard enough I put the info out there on exactl;y the parts I used to make the fans bolt on to teh radiator instead of zip ties and its wired up and ready to be pluged in and work, simple. Someone on here will know what I did im sure it aint that hard to do and no there not altima fans, altima fans require modification to fit within the frame rails, these fans dont require and modification.

[UNISA JECS]

Heres are some older pics:

http://i167.photobucket.com/albums/u159/zilvia_album/100_0180.jpg

http://i167.photobucket.com/albums/u159/zilvia_album/100_0178.jpg

and the plug and play harness

http://i167.photobucket.com/albums/u159/zilvia_album/100_0217.jpg

[UNISA JECS]

If you noticed I swaped the upper end tank which is what makes the fans bolt onto the radiator OEM style.

[UNISA JECS]

This is the plug that the electric fan set up plugs into, this is also where your stock E-fan for teh condensors plugs into also, but you toss that in the trash and install the new setup.

http://i167.photobucket.com/albums/u159/zilvia_album/P1160030-1.jpg

[s14fbs]

have the same fans and i just took the driver side fan plug cut it off and ran it to the passenger fan so both of them are on one plug and just plug it in where the stock acc fan goes and it fit perfect on stock or aftermarket mines mounted to a koyo with my ka-t and works perfect
glws

[UNISA JECS]

http://img.photobucket.com/albums/v249/charlie2020/My%20S13%20SILVIA/100_0225.jpg

[haxial]

pm sent very interested.

[UNISA JECS]

Pending sale

[UNISA JECS]

Still for sale

[UNISA JECS]

Sold!!!!!!!!!!!!!!!!!!!!!!!!!!

[eSco13ar]

i appologize for re-viving this thread, but i had a quick question on the plug and play setup...for the single cam the AC condenser directly on the fan and the relay is coming from the driver side...does that sound right?


thanks in advance!

[UNISA JECS]

On the single over head cam there is a green wire in the front drivers side cornver near the headlight area that needs to be swaped I cant recall the name os the wiring and posistioning cause its been awhile since I did one on a SOHC but once you do that it'll work just like the DOHC works and turn on exactly at 100degrees

[eSco13ar]

now when you say the green wire needs to be swapped out...what do you mean by that?
start a female plug from there or get rid of it completely?

thanks again!