oil lines..where else? *searched*

[s13silady]

was wondering if any of you guys know anothe website that carries oil feed lines besides JGSTools..
Jgs is not resoinding to my emails and i really need to get them...
i have searched but gave me irrelevant topics so any help would be appreciated...

also if any of you pieced together your own oil lines can you please post the thread sizes and all the other good stuff for me and whatever else is needed to piece your own thanks

*ryan

[AceInHole]

All parts can be found at www.mcmaster.com

Oil Path: Cost
--------------------------------------------------------
1/8" BSPT hex nipple: = $2.50
Female T: 1/8" Brass BSPTxBSPT = $3.50
Brass Adapter: 1/8" Male BSPT to 1/8" Male NPT = $5.00
Coupling: 1/8" Female NPT to Female NPT = $2.00
Braided Hose: 3/16" Hose ID, 1/8" male ends = $11.00
90deg Male Elbow: 1/8" Alum NPT x NPT = $6.00
Adapter to turbo housing = $2

[s13silady]

hey thanks a lot ACE.. one quick question whast NPT and BSPT stand for? and if i were to scavenge around for these parts what local store (ie. kragen, pep boys, etc) would i be able to find all these? or do i have to go through MCMASTERS to get there?

[AceInHole]

Originally posted by s13silady
hey thanks a lot ACE.. one quick question whast NPT and BSPT stand for? and if i were to scavenge around for these parts what local store (ie. kragen, pep boys, etc) would i be able to find all these? or do i have to go through MCMASTERS to get there?

mcmaster has excellent shipping. I've ordered stuff and received the part the next day on some occasions (through ground shipping, too).

most hardware stores and part stores will only have NPT or flare (AN) fittings. BSPT stuff is sort of hard to find from my experience.

NPT = National Pipe Thread

BSPT = British Standard Pipe Thread (I think)

[the head]

what size is the turbo housing adapter ace??

[AceInHole]

depends on the turbo. Mitsu's use a metric fitting. I think mine has a 10mm fitting on it.

[the head]

SR-20 t-25