View Full Version : What exhaust would you get? apexi n1 or gt spec?
turboex
03-28-2003, 08:28 AM
car is a 92 240sx woth sr20det. looking to hit 400hp one day.
what exhaust should i get.
N1 or the GT spec.
and why. I know people say the gt spec is an over kill but i really want the stainless steal.
also which one is louder?
thanks
Dousan_PG
03-28-2003, 08:49 AM
400 HP good luck. its more work then just a turbo
anyways if you expect 400 either is fine.
since 400HP takes LOTS of money, i'd go w/ the N1, its smaller and since you have so much money for 400 hp, you can buy a GT spec when you get near to 400hp level
of cousre you can get GT spec now because a lot of guys use it but its just really big and a waste imho. go N1, good power and well built exhaust.
so it basically comes down to your call.
sykikchimp
03-28-2003, 08:50 AM
The GT Spec sounds Badass on an SR.. and it being stainless, it will last a lot longer.
turboex
03-28-2003, 08:57 AM
yeah i hear what your saying about the hp 400hp. BUt ihave build a few 400pluss and a 500hp honda. Mine was a 300hp b16. So im not to worryed about that. cause the nissan is fun to drive even with the stock sr20det, where hondas you had to hop them up just to make them fun. Anyways the gt spec is only 40 bucks more than the n1. Or im getting it for 540 shipped. Pluss i had a greddy on a civic that did not have stainless piping and it rusted throught. Also the sound is a bit of a factor. Any more oponions on the better sounding one?
Dousan_PG
03-28-2003, 09:01 AM
ah most dont understand you have to do quite a bit internal work around/near 350 hp. some say 400, but on average internal work required around 350 for reliability.
good luck.
i say n1, its not ridiculously huge.
u want best sounding you get Fujibutso.
RS*R new ones are coming out soon too, SO NICE
www.rs-r.com
also check out some HKS ones (over priced imho)
Blitz makes nice exhausts.
turboex
03-28-2003, 09:12 AM
Originally posted by dousan36
ah most dont understand you have to do quite a bit internal work around/near 350 hp. some say 400, but on average internal work required around 350 for reliability.
good luck.
i say n1, its not ridiculously huge.
u want best sounding you get Fujibutso.
RS*R new ones are coming out soon too, SO NICE
www.rs-r.com
also check out some HKS ones (over priced imho)
Blitz makes nice exhausts.
Yeah i hear ya on the internals. but the sr makes up for it with the torque you get out of the box. So even 300 hp might be enough for me. Im just looking to hit 7's in the 8th, (we dont have a quarter). Im im honesty not sure what hp it will take to reach that as im new to the nissan stuff. Honda wise it would take about 270hp in a 2200lb car with LSD and slicks. Or about 350 hp witha 2600lb civic or integra, also needing LSD and slicks. But im more or less looking for the quality and durability, also the sounds is what i hear is a great selling point for the GT spec. Also how bad is the ground clearance witt that size pipe under the car?
SimpleS14
03-28-2003, 09:14 AM
Why are people always aiming for 400hp? :confused:
I would take the N1.
sykikchimp
03-28-2003, 09:18 AM
Originally posted by dousan36
u want best sounding you get Fujibutso.
Isn't that Fujitsubo ? And you are correct, they sound awesome too. They have a TON of sound clips on their site too.
the big down side of the GT Spec is the huge canister.. If you need lots of ground clearance, it's not for you.
Dousan_PG
03-28-2003, 09:19 AM
Originally posted by sykikchimp
Isn't that Fujitsubo ? And you are correct, they sound awesome too. They have a TON of sound clips on their site too.
the big down side of the GT Spec is the huge canister.. If you need lots of ground clearance, it's not for you.
haha....that's it. i cant spell.
turboex
03-28-2003, 09:20 AM
Good question, ok how about 397hp. LOL J/K I dunno all my customers seem to ask for 500hp but there honda guys. I just know that 400 is reachable with good tunning and a ton of parts where 500hp is very rare for sr's. Its weird, before every honda guy (real honda guy) wanted 300hp, then 400hp, now most people seem to shoot for 500hp. I just did a motor that made 543hp but the motor had about 12grand into it. Its a dart blocked honda
turboex
03-28-2003, 09:21 AM
What kind of drop can i do and still get around? Also the other main question. whick one sounds better? the gt or n1? thanks for keeping this post alive.
Dousan_PG
03-28-2003, 09:25 AM
Originally posted by turboex
I just know that 400 is reachable with good tunning and a ton of parts where 500hp is very rare for sr's.
VERY rare in the USA.
somewhat rare in japan. big time tuners/drifters get 500ish-550ish on average. not much beyond that for the most part, but they do exist.
just lots of work.
dont know on the drop q, sounds better? that's personal opinion, i like the N1 more. the GT is nice but i think the N1 looks and sounds better
turboex
03-28-2003, 09:29 AM
Hum.. i did not know that, thanks for the info. So you have heard both of them im taking? What one is louder?
turboex
03-28-2003, 09:31 AM
also i like your quote down there. I put my friends tenzo-r 18inch shu-4's on my car just to see the look as i love the rim. They were of a 96 integra and they need to stick out like another inch to look good. I want 17s but its damn hard to find nice rims witht he right offset. I also like the racing hart c2's and c3's but then theres the offset problem again
Dousan_PG
03-28-2003, 09:36 AM
NOOOO!
its EASY
you MUST leave the KNOCK OFF crap market. tenzo, konig
all junk
get some REAL wheels that have proper offsets.
5zigen
advan
volk
etc
dont support knock offs. they just leach of real quality brands of wheels. get the real deal.
GT is DEFINATELY louder
turboex
03-28-2003, 09:39 AM
thanks for the help on that one. advan and volk kinda spendy. ill check the other
Grant
03-28-2003, 09:40 AM
with the prices i have seen lately, GT spec is actually cheaper than N-1 now. Maybe that's just retail price..
Dousan_PG
03-28-2003, 09:42 AM
Originally posted by turboex
thanks for the help on that one. advan and volk kinda spendy. ill check the other
you pay for quality and weight savings
i hope you dont end up paying retail for all this stuff. (engine build up and all). that would be sucky.
turboex
03-28-2003, 09:43 AM
what is a good site that sell 5zigen and list the offset?
Dousan_PG
03-28-2003, 09:47 AM
go here
www.autoimaging.com
look at ALL the wheels available. look at the offsets and sizes available. you'll see how crappy tenzos, konigs, etc etc are. its sad how much they knock-off.
also check out the GP SPorts exhausts (performance section) as well asother exhausts. there is LOTS more then apex out there.
turboex
03-28-2003, 09:49 AM
thanks again, hey man do you have IM? would be cool if i could shout at ya when im stuck like this. rather than filling up this website
Dousan_PG
03-28-2003, 09:58 AM
i private messaged you my aol screenname
your new to site right? from main forums index page, very bottom, private messages.
im only on AOL nighttimes PST
RedlineRacer
03-28-2003, 10:38 AM
Speaking of 5zigen, have you seen the new Fireball rim? That rim is nice, I am thinking about getting a set of those.
turboex
03-28-2003, 01:10 PM
Is the n1 a one piece exhaust? like a big ass box and all
Dousan_PG
03-28-2003, 01:18 PM
Originally posted by turboex
Is the n1 a one piece exhaust? like a big ass box and all
YEP! shipping HURTS for that one.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.