R33 RB26 Compression

[Neski]

does anyone know the compression (psi numbers) of this engine?

per cylinder...:)

thanks for the help guys and gals

[godsmack]

just do a compression check and look at the differences. if something is wrong not all should be bad and you should have different numbers. if all is the same then should be gtg.

[fliprayzin240sx]

I imagine its not that far off compared to SRs. SR minimums per FSM is 125 psi. So if you have 150 +/- 10 from each other, you should be good to go.

[Darius]

About 150 psi. Compression doesn't tell jack unless it has major gasket problems. Do a leakdown test if you want to know the true condition of the engine.