Work Equip (3pc) 17x9/17x10 +22 5x114

[KOUKI_VERS13]

Sssssssssooooooooolllllllddddddd

[KOUKI_VERS13]

.................

[boon240]

man if you were only in kali, i'll snatched these up in the quickness

[Devil Man]

are you interesting in trading for some bbs wheels?

[jholman05]

How much shipped to 47012? Anymore pics, maybe some of the insides?

What are the weights on these?

[KOUKI_VERS13]

man if you were only in kali, i'll snatched these up in the quickness
Make a decent offer and they'll be shipped to you right away!

are you interesting in trading for some bbs wheels?
Man, I LOVE LM's.. but I'm looking to stick with 18's, thanks, though.

How much shipped to 47012? Anymore pics, maybe some of the insides?

What are the weights on these?
I really don't know the actual weight of the rims until I dismount the tires, but I entered 30 lbs. per (should be more than enough), along with the box dimensions, and it came out to $35 per box via USPS Parcel Post (14 days). So, you're looking at about $150, maybe a little more to ship to you. Priority Mail was something like $115 per box, ridiculous. Here's two more pictures, first of the 10" wide rim, then the 9" (only pictures I have right now).
http://i20.photobucket.com/albums/b247/KOUKI_VERS13/DSC01367.jpg
http://i20.photobucket.com/albums/b247/KOUKI_VERS13/CopyofDSC01187.jpg

[jholman05]

Sounds fair on the shipping price. I would just go with the USPS Parcel Post not really in any rush to get these as I have to get the car painted first. What size tires were you running? Can't really tell from the picture but are the rear fenders rolled any? I'd like to get a few pictures of the fitment if you still have the car, as I'm looking for a set of wheels I can run decent rubber on 275/255 with as little camber as possible. Fronts seem to have a great size I'm just worried I'm going to have to run more camber than I would like in the rear. Would you even consider shipping with the tires on?

Anyways very intersted in the wheels! Just like to see a few more pictures, hopefully on an S13.

Thanks,
Jesse

[KOUKI_VERS13]

Sounds fair on the shipping price. I would just go with the USPS Parcel Post not really in any rush to get these as I have to get the car painted first. What size tires were you running? Can't really tell from the picture but are the rear fenders rolled any? I'd like to get a few pictures of the fitment if you still have the car, as I'm looking for a set of wheels I can run decent rubber on 275/255 with as little camber as possible. Fronts seem to have a great size I'm just worried I'm going to have to run more camber than I would like in the rear. Would you even consider shipping with the tires on?

Anyways very intersted in the wheels! Just like to see a few more pictures, hopefully on an S13.

Thanks,
Jesse


The tire sizes are 225/45 and 235/45. Yes, the rear fenders were rolled just a bit, and the lip was hammered in. Actually, you should be fine with 275's in the rear (after a bit of modification to the fender, a slight roll like mines will do), because even with 20mm spacers, the tire still had about 15mm's of clearance from the fender. My car is kind of low, though, which helped in the rear clearing the fenders even more. With the 9" +22 offset in the front along with a 3mm spacer, the tire was a few mm's away from the fender (0 camber). I also banged in the lip on the front fenders for added clearance.

I never did take any close-up shots of the fitment with these rims on my car, the best one I found was the one posted above, so I tried explaining the best I could. Try and check the chat forums, there's a thread called 'wheel fitment whore thread', tons of examples for you to look at.

If I was to try and ship with tires, it would not only cost much more, I would also have to get different boxes for them. With tires, I'm asking $2100 OBO.

[nOaAAa]

would you split them up?

[jholman05]

http://i20.photobucket.com/albums/b247/KOUKI_VERS13/CopyofDSC01187.jpg


So in this picture you're running a 20mm rear spacer rear and 3 front? I've seen the wheel fitment thread, but like the maximum rubber thread more. I already have my rear fenders rolled and pulled fronts are still stock. I feel better now that you said you had that big of spacer in the rear. Someone is buying my '89 coupe on monday so I should have the money for these soon, look to be just what I wanted. I'd be running 40 series tires so I think I could get away with 275/255.

[KOUKI_VERS13]

Yup, in that picture I have the said spacers installed. When you're ready to talk business, PM me..

thanks.

[gordonliu]

I hate to clutter your thread with questions:

what kind of brakes? how is the inner clearance (between coilover and inner side of wheel)?

[KOUKI_VERS13]

would you split them up?
As I said in the PM reply, I'm not willing to sell by pairs unless another buyer is found for the other pair. Thanks for the interest.

I hate to clutter your thread with questions:

what kind of brakes? how is the inner clearance (between coilover and inner side of wheel)?
Stock brakes.
I had to run the 3mm spacers, mainly for the purpose of clearing the very bottom of the spring/spring perch. Setting the coilovers to sit the car really low didn't help either. So I think it might vary a little bit based on your setup, maybe even type or brand of coilover.

[jholman05]

Did it look like they would easily clear z32 brakes? I have willwoods which are almost the same size as z32. I'll know for sure if I'll be getting these in a couple days, just have to see how all my finances stack up.

[KOUKI_VERS13]

Did it look like they would easily clear z32 brakes? I have willwoods which are almost the same size as z32. I'll know for sure if I'll be getting these in a couple days, just have to see how all my finances stack up.

If I remember correctly, there was about 10-15mm of clearance. I KNOW that it wasn't close to the wheel spoke, so you should be alright with brake clearance.

[jholman05]

Nice, well by this time tomorrow I'll know if I will be picking up these wheels. Hopefully my '89 coupe will be sold and I'll have money to pick these up. I am unable to send you a pm, maybe it's becuase you are a premium member? Try sending me a pm and we can discuss this.

Thanks,
Jesse