View Full Version : Safc help
xs042sx
04-12-2009, 07:34 AM
if i install an safc without tuning it to take it to a shop to get tuned will the car run?
teamsprock
04-12-2009, 09:36 PM
If everything is (1) wired correctly, (2) you have the correct setup settings and (3) all of the tuning points are left uncorrected it will run the same as stock.
an AFC modifies the signal, depending on what you tell it to do... so leave all the tuning parameters at zero and you are telling it to do nothing!
Hope that helps
fliprayzin240sx
04-13-2009, 12:57 AM
Depends on whether or not you changed the injector size or upgraded to a Z-maf. Z-maf is easy, injector/fuel map is where it gets fun.
ATXSR20
01-26-2010, 12:48 PM
I am curious on the last part of this b/c I have seen people posting everything from 2in 5out to 6in 6out all with a Z32 mafs and my car stalls out a couple seconds after starting it on any of those settings. I had to use 1in and 7out or maybe 6 out I would have to check. I am curious why everyone else has a 2 or a 6 in and I have a 1in... Is there a link on here for safc install tips? I am searching safc install and tuning...
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.