PDA

View Full Version : Power FC tuning


ka24det92
03-30-2009, 03:09 PM
Hello i am having a problem the guy who was going to tune my car dose not have any base maps to go off of. I already put all the up grades on my car and cant go back to the stock ecu cause most of the stock stuff is gone. My setup is a s13 black top with 550 d-works, z32 airmass, 2871r, i dont know what else you would really need to know. I was wondering if any one was running the same setup and could give me the specs to put into the comander so i can get my car running so i can get to a dyno so any help would be great thanks in advanced.

ANVIL
03-30-2009, 04:05 PM
your tuner is going to tune your car with just the hand commander? if you take it to a certified APEX'i dealer, they have the actual program to tune it and it has base maps. also you can get your own software/logger, im using Datalogit with my power fc

ka24det92
03-30-2009, 08:43 PM
is it not posable to tune with the commander???

slider2828
03-30-2009, 09:27 PM
Yes its possible.... but its made for more fine tuning.... Ask Steve Shadows is his SN.... He wil help you and sell you a map...

Tell him Ken sent you

ka24det92
03-30-2009, 09:32 PM
ok thanks alot

ANVIL
03-31-2009, 09:46 AM
you can tune with it but it would just take a LOT longer. and plus, you wont have anything to log what your car is doing. just only live reads really. id imagine it would suck to do the tune with the hand commander.