PDA

View Full Version : CA 300zx F+R Brakes, JIC exhaust, Blitz intake, Defi, Catco, Whiteline Sway,5 Lug + MORE


Sil-Abc
03-28-2009, 08:46 PM
Z32 Front Calipers + Brembos + SS S13 Conversion Lines + Project MU B-Force Pads
-26 mm ALUMINUM calipers
-when i bought them, they were rebuilt by infiniti dealership and powdercoated gold and silver
-All hardware included
-pads have about 25% or less life on them. (ive had them on since 2005 and pulled the calipers off in 07/08, these pads last A LONG TIME)
-brembos are slotted and drilled with surface rust that will come after a few braking sessions
-everything is all setup and is a simple bolt on, literally a simple bolt on
-Cosmetic damage to passenger caliper because of using a civic type-r spare from a flat (bad offsets). DOES NOT AFFECT PERFORMANCE AT ALL
PRICE: $435 SHIPPED

http://photos-f.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36466005_7246118.jpg
http://photos-g.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36466006_4982933.jpg
http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36466007_4708626.jpg
http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36466008_507422.jpg
http://photos-b.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36466009_1919365.jpg
http://photos-c.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36466010_5577690.jpg


S14 Rear Rotors Blanks
-Bought them brand new from dealership
-only surface rust from water, will go away after a braking session
-great condition
PRICE: $35 SHIPPED

http://photos-d.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36466019_5452358.jpg

S13 Front 4 Lug Hubs + Spindles
-great condition
-no use for them
-pick up only
PRICE: $20 PICKED UP ONLY

http://photos-c.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36466018_1947250.jpg

S14 Front 5 Lug Hubs + Spindles
-Dust shields still intact and in great condition
-Hub bearings may need to be replaced in near future
-No studs installed BUT i will include some if you want
-IIRC the S14 spindles give more angle than the S13 spindles so you sacrifice that if you go with ichiba stuff (Dont quote me on it but thats what i THINK i remember)
PRICE: $260 SHIPPED

http://photos-e.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36465988_5040852.jpg
http://photos-f.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36465989_2737575.jpg

S13 SMIC + Recirculation Valve
-bent fins like everyone elses
-recirc is still on it
PRICE: $40 SHIPPED

http://photos-g.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36465990_1294571.jpg
http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36465991_8237541.jpg

S13 Redtop Power Steering Pump SR20
-brand new refurbished from kragen
-never used, great replacement
-lifetime warranty
PRICE: $160 SHIPPED

http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36465992_868360.jpg
http://photos-b.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36465993_4271001.jpg
http://photos-c.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36465994_3346134.jpg

S13 Stock SR turbo elbow + 2 o2 sensors
-comes with o2 sensor
-Don't know the condition of the sensor but i will include an extra one
PRICE: $25 SHIPPED

http://photos-d.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36465995_6459913.jpg
http://photos-e.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36465996_6841384.jpg


Muteki Lug Nuts (blue)
-20 blue lug nuts with wear
-no key included
PRICE: $25 SHIPPED

http://photos-b.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36466001_7057506.jpg



S13 Front Side Marker
-I think its for the rear passenger (dont kno and i cant check because i dont have the holes there anymore)
-should fit both sides if u flip it upside down
-no cracks
PRICE: $10 SHIPPED

http://photos-f.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36466013_3319564.jpg

S13 SR Shifter
-extra one lying around
PRICE: $15 SHIPPED

http://photos-e.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36466020_5076227.jpg

S13 HATCH Rear Center Garnish
-great condition
-no cracks
PRICE: $10 SHIPPED EACH

http://photos-f.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36466021_4264068.jpg

S13 Rear Whiteline Adjustable Sway Bar
-great conditon
-comes with all hardware and needed stuff
-can be adjusted to users preference
-paint is coming off around exhaust area from heat but doesnt affect performance
-great sway bar (check reviews)
PRICE: $125 SHIPPED


http://photos-f.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36465965_4584727.jpg
http://photos-g.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36465966_934454.jpg
http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36465967_6746604.jpg

Defi Link Water Temp Gauge Fahrenheit (52mm) - Black

-This comes with the temp sensor that connects to it. Great condition, used for a year with no issues. Cheap considering that Defi raised prices for all their products. Lights up green.

PRICE: $115 SHIPPED!

http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2563/115/47/6708916/n6708916_36351319_1811093.jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs023.snc1/2563_581528240648_6708916_36351320_8061887_n.jpg

Blitz SUS Power Intake Kit (S13 KAE/KADE/SR20)

-Just cleaned it up and its in great condition! comes with original box with everything you need to hook it up. Great intake and its alot better than most others.
*The Blitz SUS filter kit for SR20DET is comprise of full stainless constructions. The pores of the filter are 100 micron small. This filter is able to last a life time with only periodic wash with water.*

PRICE: $140 SHIPPED!

http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs023.snc1/2563_581528250628_6708916_36351322_56360_n.jpg
http://photos-d.ak.fbcdn.net/photos-ak-snc1/v2563/115/47/6708916/n6708916_36351323_6033822.jpg
http://photos-e.ak.fbcdn.net/photos-ak-snc1/v2563/115/47/6708916/n6708916_36351324_5696465.jpg



Megan Racing Downpipe
-dirty over time
-scraps and a small dent in the bottom from being too low and hitting unsuspecting children
-no 02 bung holes, just a pipe.

$45 SHIPPED!

http://photos-c.ak.fbcdn.net/photos-ak-snc1/v2061/115/47/6708916/n6708916_36105826_6777.jpg
http://photos-d.ak.fbcdn.net/photos-ak-snc1/v2061/115/47/6708916/n6708916_36105827_7110.jpg
http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2061/115/47/6708916/n6708916_36105831_8455.jpg

*no hardware is included. u can get the bolts and stuff from an ace hardware or something.* ALL OBO!


CATCO High Flow Cat
-everything still in great condition
-direct bolt-on, no modification needed
PRICE: $110 SHIPPED

http://photos-b.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36493049_3725340.jpg
http://photos-c.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36493050_3996022.jpg
http://photos-d.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36493051_4557842.jpg

JIC 3" Catback Exhaust System
-no scratches or damage from common signs of bottoming out
-just dirt which can be easily washed off
-WILL NOT SHIP (ONLY AT BUYERS EXPENSE BUT ITLL BE HIGH)
-great condition and perfect for turbo setups
-I CAN MEET U HALFWAY SO IT WONT BE THAT FAR OF A DRIVE
-ABSOLUTELY NO SIGNS OF SCRAPS OR BOTTOMING OUT

PRICE: $340 PICKED UP

http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36493055_1060202.jpg
http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36493056_1225687.jpg
http://photos-b.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36493057_5849399.jpg
http://photos-c.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36493058_3367319.jpg
http://photos-d.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36493059_4193873.jpg

S13 Redtop SR Tranny
-grinds from 2nd to 3rd gear if shift too quickly
-doesn't grind if you ease it in like a regular manual car driver

PRICE: $90 PICKED UP

http://photos-e.ak.fbcdn.net/photos-ak-snc1/v2575/115/47/6708916/n6708916_36493060_5376704.jpg


BUY MY STUFF!!! I AM OPEN TO OFFERS AND TRADES FOR ENGINE INTERNAL STUFF OR SPL TIE RODS!

Dripht240
03-28-2009, 09:54 PM
ok need to check if the hks intake adapter plate will fit an s14 kade super interested pending that and also the blue lugs i assume they are nissan threads... also whats the inlet/outlet size on the catco hi-flo? i may take all three... dibs

Sil-Abc
03-29-2009, 05:40 PM
bump bump bump bump 1 1 1 1 1

SOME ITEMS WERE LOWERED IN PRICE!!!!

frankist
03-29-2009, 11:02 PM
i cant tell in the picture but are the blue lug nuts open ended or closed.
i also pm'd ya.
thanks francis s.

Sil-Abc
03-30-2009, 08:47 PM
bump 2 for this thread

prices lowered