need help: project kic spacer

[da8o8santaclauz]

anyone happen to know the stud measurements for the proejct kic bolt on spacers? 30mm if it matters thanks

[slider2828]

Measure the thickness of the spacer then cut... Not rocket science.

[da8o8santaclauz]

sorry if i was not clear but by measurements i meant the actual diameter/knurl of the stud, anyone happen to know? already searched but no luck

[slider2828]

Its exactly like stock.... But if you need a replacement, you can get them directly from project kicks. My friend got 6 for like 25 dollars...

[da8o8santaclauz]

thanks for the input but it is not exactly like stock, the only thing thats same as stock is the thread but the knurl is different. i know because i tried using a stock stud i had lying around,

[slider2828]

Yeah its slightly different.... Try to order one from Project Kics is your best bet

[da8o8santaclauz]

bump any help will be appreciated

[japslapsilvia]

Let me google that for you (http://tinyurl.com/dcs7kh)

[da8o8santaclauz]

yea i searched before and found a thread in my350z via google results but it was down so i thought the site was gone, but now it seems to be working fine....thanks

[holemilk00]

Its exactly like stock.... But if you need a replacement, you can get them directly from project kicks. My friend got 6 for like 25 dollars...

Its definitely not like stock, maybe the thread pitch, but the actual shoulder of the stud on the spacers is different.


OP, just take them to AutoZone or Advance and have someone try a few till they get one that fits, then you know the size.