PDA

View Full Version : S15 OEM boost guage

hall382
03-17-2009, 06:49 AM
I have a 2001 S15 ADM and i want to install a OEM Boost gauge from the JDM models
what parts do i need?
drifter_for_life06
03-17-2009, 07:30 AM
the gauge and vaccum hoses and a t-fitting(if its mechanical) or the sending wires(if its electrical)
s15specR
03-17-2009, 08:17 AM
You'll need the sending unit that sits on the strut tower, has 4 wires connected to it and one or two hoses (I think), the wires runs up the pillar and connect to the back of the guage via the little plug in harness, however I believe only one wire is the signal wire on the harness to the guage and the others are power, illumination and ground.
hall382
03-18-2009, 06:09 AM
will this be a hard instilation?
drifter_for_life06
03-18-2009, 10:53 AM
no...boost gauges are pretty simple to install if you have any mechanical knowledge what so ever.
hall382
04-01-2009, 06:09 AM
where abouts do you connect it on the wiring loom?